Wireless Access

 View Only
last person joined: 19 hours ago 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

Airgroup not working after migration v6 to v8

This thread has been viewed 12 times

  • 1.  Airgroup not working after migration v6 to v8

    Posted Aug 08, 2022 12:29 PM
    Like the title says: Airgourp not working since we migrated to v8.10.0.2 from 6.5.4.x

    - Airgroup is enabled with same services as on v6
    - I can see  Airgroup Servers with service airprint
    - I can see Airgroup Clients

    I noticed one strange thing in the cli:

    airgroupprofile "XX"
    service "DIAL"
    service "airplay"
    service "airprint"
    service "allowall"
    service "DLNA Print"
    disallow-vlan type servers service ""
    disallow-role "" type servers service ""
    disallow-role "guest_logon" type users service "allowall"
    disallow-role "guest-logon" type servers service "allowall"

    there are 2 lines in the config, which i do not understand and which are note deleteable:

    disallow-vlan type servers service ""
    disallow-role "" type servers service ""

    [mynode] # show airgroup status

    AirGroup Information
    --------------------
    Feature Status
    ------- ------
    AirGroup mode Distributed
    AirGroup Profile XX
    CPPM Profile
    Active domain

    MDNS Enabled
    DLNA Enabled
    Enforce Registration Disabled
    IPV6 Disabled

    AirGroup Service Information
    ----------------------------
    Service Status
    ------- ------
    DIAL Enabled
    airplay Enabled
    airprint Enabled
    allowall Enabled


  • 2.  RE: Airgroup not working after migration v6 to v8

    EMPLOYEE
    Posted Aug 09, 2022 05:28 AM
    Unsure about the undeletable commands; Aruba Support may help if there are no responses on this question.

    Be aware that with ArubaOS 8, AirGroup and how it works has significantly changed from AOS 6.x. Concepts like distributed and centralized were introduced, and more which makes that migration may take more than just copying the same configuration.

    Check the AirGroup deployment Guide, as well as the ArubaOS documentation. Recent versions of ArubaOS (like 8.10.x) have some further improvements in AirGroup which may not yet be covered in the deployment guide.

    ------------------------------
    Herman Robers
    ------------------------
    If you have urgent issues, always contact your Aruba partner, distributor, or Aruba TAC Support. Check https://www.arubanetworks.com/support-services/contact-support/ for how to contact Aruba TAC. Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba Networks.

    In case your problem is solved, please invest the time to post a follow-up with the information on how you solved it. Others can benefit from that.
    ------------------------------

    Original Message