Controllerless Networks

 View Only
last person joined: yesterday 

Instant Mode - the controllerless Wi-Fi solution that's easy to set up, is loaded with security and smarts, and won't break your budget
Back to discussions
Expand all | Collapse all

AP-574 with WPA v1 and 802.1X PEAP

This thread has been viewed 5 times

  • 1.  AP-574 with WPA v1 and 802.1X PEAP

    Posted Feb 07, 2024 10:02 AM

    Hi

    I would like to propose AP-574 for a customer with multiple sites in controller less mode ( 1 depot = 1 

    But he have a very strong requirements of supporting old WPA v1 with enterprise authentification to radius microsoft PEAP server for industrial devices that could not be upgraded.

    Is still possible (WPA v1 does not appear in all recent documentation)

    thanks

     



  • 2.  RE: AP-574 with WPA v1 and 802.1X PEAP

    EMPLOYEE
    Posted Feb 07, 2024 10:03 AM

    WPA Enterprise shows up in my Aruba Instant (version 8.11):

    So, you are probably ok. Best to test in lab of course...



    ------------------------------
    Herman Robers
    ------------------------
    If you have urgent issues, always contact your Aruba partner, distributor, or Aruba TAC Support. Check https://www.arubanetworks.com/support-services/contact-support/ for how to contact Aruba TAC. Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba Networks.

    In case your problem is solved, please invest the time to post a follow-up with the information on how you solved it. Others can benefit from that.
    ------------------------------

    Original Message