Controllerless Networks

 View Only
last person joined: yesterday 

Instant Mode - the controllerless Wi-Fi solution that's easy to set up, is loaded with security and smarts, and won't break your budget
Back to discussions
Expand all | Collapse all

[AP-635]: 8.10.0.5, massive management frames on 2.4 GHz and 6 GHz

This thread has been viewed 26 times

  • 1.  [AP-635]: 8.10.0.5, massive management frames on 2.4 GHz and 6 GHz

    Posted Dec 01, 2022 02:46 AM

    So, let´s look at one of our Aruba AP-635 access points. What cause those high rates of management frames and errors, concurrently on 2.4 and 6 GHz?

    • 5 GHz is ok
    • 2.4 Ghz is full of management frames, massive errors, except utilization is low
    • Let´s look at 6 GHz. There is no client connected, but management frames and error counters are at the same level as those on 5 GHz; at the same time.


  • 2.  RE: [AP-635]: 8.10.0.5, massive management frames on 2.4 GHz and 6 GHz

    EMPLOYEE
    Posted Dec 01, 2022 09:55 AM
    Because the numbers for 'Out' look the same on 2.4Ghz and 6G, I expect a bug in the WebUI. Please open a TAC case.

    71.5 million frames per second seems unrealistic high, can't imagine that the number is correct.

    ------------------------------
    Herman Robers
    ------------------------
    If you have urgent issues, always contact your Aruba partner, distributor, or Aruba TAC Support. Check https://www.arubanetworks.com/support-services/contact-support/ for how to contact Aruba TAC. Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba Networks.

    In case your problem is solved, please invest the time to post a follow-up with the information on how you solved it. Others can benefit from that.
    ------------------------------

    Original Message