I just noticed that my AP-635s are only set to 2x2 Radio.
Is there an option to change this to 4x4 or is this configuration correct?
#show ap power-mgmt-statistics ap-name AP_TEST_635
AP Power Mgmt Status, Last update at 2024-05-15 10:19:24
--------------------------------------------------------
LLDP Granted Power Eth 0: 25.5 Eth 1: 0.0
LLDP Request Power Eth 0: 25.5 Eth 1: 25.5
Power Supply POE-AT
USB Status USB Knob: Auto, USB Status: Enabled
PSE Status N.A.
ETH Status Eth 0:Enabled. Eth 1:Enabled.
Radio 5GHz Chain 2*2
Radio 5GHz Enable Enabled
Radio 5GHz Power Full Power
Radio 2.4GHz Chain 2*2
Radio 2.4GHz Enable Enabled
Radio 2.4GHz Power Full Power
Radio 6GHz Chain 2*2
Radio 6GHz Enable Enabled
Radio 6GHz Power Full Power
Second 5GHz Radio Chain 2*2
Second 5GHz Radio Enable Enabled
Second 5GHz Radio Power Full Power
CPU Throttle 100%
Power Consumption 9.7W
IPM Enable Enabled
ITM Status Not Supported
Thanks!