Wired

 View Only
last person joined: yesterday 

Back to discussions
Expand all | Collapse all

Aruba 1960 InstantOn - Can't route IP packets between VLANs

This thread has been viewed 11 times

  • 1.  Aruba 1960 InstantOn - Can't route IP packets between VLANs

    Posted Dec 15, 2022 11:30 AM
    Can  anyone help me.
    I am trying to use the Layer 3 IP routing in the 1960 switch series to route IP packets between subnets on different VLANs.
    I configure a switch with two VLANs, enable routing and define static IP addresses for each VLAN interface in the switch.

    A computer on each VLAN can ping the switch at the IP address of the VLAN interface for that computer, and I can PING the interface on the switch on the other VLAN.

    However, I can route packets through the switch to another computer on the other VLAN.

    Computer 1 - VLAN 1 (192.168.1.2) 

    Switch JL806A   VLAN 1 (192.168.1.1) and VLAN 2 (192.168.2.1)

    Computer 2 - VLAN 2 (192.168.2.2)

    Computer 1 and 2 can each ping both interfaces on the switch.
    Computer 1 & 2 can't ping each other

    The manual indicates that the switch does route packets at Layer 3.

    Help!


  • 2.  RE: Aruba 1960 InstantOn - Can't route IP packets between VLANs

    EMPLOYEE
    Posted Dec 15, 2022 12:03 PM
    Please ask your question on the Aruba InstantON forum

    ------------------------------
    Herman Robers
    ------------------------
    If you have urgent issues, always contact your Aruba partner, distributor, or Aruba TAC Support. Check https://www.arubanetworks.com/support-services/contact-support/ for how to contact Aruba TAC. Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba Networks.

    In case your problem is solved, please invest the time to post a follow-up with the information on how you solved it. Others can benefit from that.
    ------------------------------

    Original Message