Hi
I have not worked with the 2530 switches and activated this. In the 2930F series the command is 'device port-mode'.
According to the document Aruba 2530 Access Security Guide for AOS-S 16.09 RADIUS VSA assignments for ArubaOS-Switch are made under HPE Vendor-Specific ID 11 and the attribute hp-port-macauth-port-mode is controlling this setting.
From the document:
hp-port-macauth-port-mode Type #: 14
Platforms supported: All
Description:
Sets the port to port-based mode for a MAC Authentication
Length: 4 Type: Integer
Value range: A port-based VSA is set with a value of 1.
Format: HP-Port-Auth-Mode-MacAuth = 1
Hopefully this can guide you in the right way.
------------------------------
Best Regards
Jonas Hammarbäck
MVP Guru 2024, ACEX, ACDX #1600, ACCX #1335, ACX-Network Security, Aruba SME, ACMP, ACSA
Aranya AB
If you find my answer useful, consider giving kudos and/or mark as solution
------------------------------
Original Message:
Sent: May 19, 2024 11:32 AM
From: Shachar
Subject: Aruba 2530 port-access auth-mode
Hi Guys,
I'm looking for a command like aaa authentication port-access auth-mode (AOS-CX), to configure in Aruba 2530.
the purpose is to authenticate a single MAC (of an Access Point), without authenticating mac address coming for them.
Thanks.