Based on this information it's hard to say something useful.
Thing you can try:
- Change the PC to a different port (swap with another client); see if the issue is on the port or on the client
- Replace the cable between switch and PC
- See that if you see the issue, then disconnect the cable and connect back, if that resolves the issue.
------------------------------
Herman Robers
------------------------
If you have urgent issues, always contact your Aruba partner, distributor, or Aruba TAC Support. Check
https://www.arubanetworks.com/support-services/contact-support/ for how to contact Aruba TAC. Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba Networks.
In case your problem is solved, please invest the time to post a follow-up with the information on how you solved it. Others can benefit from that.
------------------------------
Original Message:
Sent: Jan 27, 2023 07:26 AM
From: FuXo
Subject: Aruba 2530 - problem
Hi,
I've got a problem with a Aruba switch.
HP 2530-48G-POE (J9772A)
Software revision : YA.16.11.0008
Sometimes PC connected to port 12 is loosing connection to everything.
Port status is UP, 1000MB/s, there is no error on that port.
When i try to see mac address on port there is no output there.
PC restart doesn't help.
The only one thing that helps is restart of a switch.
When switch is restarted everything is working fine and i can see MAC address of this PC on that port
Do you have any idea why this issue occurs and how to fix it, because restarting a switch every time is not an option i want to use ?