And the default gateway 192.168.25.1 is reachable on one of your interfaces?
------------------------------
Herman Robers
------------------------
If you have urgent issues, always contact your Aruba partner, distributor, or Aruba TAC Support. Check
https://www.arubanetworks.com/support-services/contact-support/ for how to contact Aruba TAC. Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba Networks.
In case your problem is solved, please invest the time to post a follow-up with the information on how you solved it. Others can benefit from that.
------------------------------
Original Message:
Sent: Dec 07, 2023 05:01 AM
From: oibrak
Subject: Aruba 2920 static routing
Hello Herman,
Thnaks for your response. I tried that but the second route still doesn t figure on the table but surprisingly, the first route always does.
Original Message:
Sent: Dec 06, 2023 08:50 AM
From: Herman Robers
Subject: Aruba 2920 static routing
It may be that the show route only displays active routes. A backup route may be considered not active.
You may validate this with TAC... or bring the interface connecting to your primary route down.
------------------------------
Herman Robers
------------------------
If you have urgent issues, always contact your Aruba partner, distributor, or Aruba TAC Support. Check https://www.arubanetworks.com/support-services/contact-support/ for how to contact Aruba TAC. Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba Networks.
In case your problem is solved, please invest the time to post a follow-up with the information on how you solved it. Others can benefit from that.
Original Message:
Sent: Dec 04, 2023 06:18 AM
From: oibrak
Subject: Aruba 2920 static routing
Hello Community,
Any can bring an explanation to it ?
Original Message:
Sent: Nov 30, 2023 05:05 AM
From: oibrak
Subject: Aruba 2920 static routing
Hello
I added a second default route through ip route 0.0.0.0 0.0.0.0 192.168.25.1 metric 3 name backup-route but I can not see it on the routing table through show ip route static even though the interface to the gateway is up. Any help ? Thanks