That message indicates that the login was actually successful, but probably Airwave does not recognize it as such.
You may need to upgrade to an Airwave version that supports the 6300M and firmware version running on it. Or, if the 6300M and firmware release is listed as supported for your Airwave version, open a TAC support call to get this investigated/addressed.
------------------------------
Herman Robers
------------------------
If you have urgent issues, always contact your Aruba partner, distributor, or Aruba TAC Support. Check
https://www.arubanetworks.com/support-services/contact-support/ for how to contact Aruba TAC. Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba Networks.
In case your problem is solved, please invest the time to post a follow-up with the information on how you solved it. Others can benefit from that.
------------------------------
Original Message:
Sent: Nov 06, 2023 01:12 PM
From: Menace323
Subject: Aruba 6300M Aurwave Error (Telnet/SSH Error
Hi all,
We deployed our first Aruba CX Switch Mode 6300M. All of our other switches are ArubaOS models (2930f)
When adding the 6300M to airwave, we get a SSH error for the config backup.
Error (Telnet/SSH Error: (command timed-out) in password failure: User "airwave" has logged in 31 times in the past 30 days )
I searched and searched but was not able to find a way to suppress this log in notification on the switch, or how to have Airwave perform a carriage return to get the cli prompt.
Anyone know how to clear this message?