Wired

 View Only
last person joined: yesterday 

Back to discussions
Expand all | Collapse all

Aruba 8400 PBR Stopped Working After Upgrade

This thread has been viewed 5 times

  • 1.  Aruba 8400 PBR Stopped Working After Upgrade

    Posted Jun 27, 2022 11:35 PM
    We upgraded our 8400 VSX pair from 10.06 to 10.09 and after the upgrade we were missing policies that were applied to VLAN interfaces.  The policies still existed on the cores so we re-applied to the VLAN interfaces.  We cannot get the PBR to work since the upgrade.  Here is the config:

    class ip Test-class
    10 ignore any 10.40.0.0/255.255.255.0 10.10.3.2
    20 ignore any 10.40.0.0/255.255.255.0 10.20.4.31
    30 match any 10.40.0.0/255.255.255.0 any

    pbr-action-list Test-pbr
    10 nexthop 10.250.1.10

    policy Test-policy
    10 class ip Test-class action pbr Test-pbr

    interface vlan 40
    description BYOD
    ip address 10.40.0.2/24
    ip helper-address xx.xx.xx.xx
    ip helper-address xx.xx.xx.xx
    apply policy Test routed-in
    vrrp 1 address-family ipv4
    address 10.40.0.1 primary
    priority 253
    no shutdown
    exit

    interface vlan 250
    description BYOD-Firewall
    ip address 10.250.1.2/24
    vrrp 1 address-family ipv4
    address 10.250.1.1 primary
    priority 253
    no shutdown
    exit

    Traffic from the 10.40.0.0/24 subnet is still routed to the core switch default route.  Any ideas?  Thanks in advance for any assistance.


  • 2.  RE: Aruba 8400 PBR Stopped Working After Upgrade

    EMPLOYEE
    Posted Jun 28, 2022 02:52 AM
    1) open a TAC case
    2) share the output of: show system high-capacity-tcam, show resources, show policy

    Original Message