Hi!
I'm trying to figure out how to setup IAP-VPN to virtual controller for a lab. But I get stuck since I cannot find any detailed documentation on this.
Basically all I find is this:
"Starting from Aruba Instant 8.3.0.0, IAP- is supported on Mobility Controller Virtual Appliance by using default self-signed certificate (Aruba ). For Instant AP to establish connection with Mobility Controller Virtual Appliance, the controller presents a default self-signed certificate which is uploaded on the Instant AP using Activate.
To terminate IAP- connections on a Mobility Controller Virtual Appliance , the default self signed certificate or Trust Anchor (TA) certificate of the Virtual Mobility Controller in the case of standalone controllers or the TA certificate of the Virtual Mobility Conductor that manages the Virtual Mobility Controller must be uploaded to the Instant AP to authenticate the identity of the Mobility Controller Virtual Appliance and establish an tunnel. The Trust Anchor certificate must be uploaded to Activate which will then be sent to the Instant AP, to authenticate and establish an tunnel to virtual controller.
For information on uploading and managing TA certificates on Activate for IAP- termination on Mobility Controller Virtual Appliances, see Aruba Activate section in the Aruba Activate User Guide."
Configuring Controller for IAP-VPN Operations
I figured I'll test it out even though it's not very clear on what to do.
But when trying to access the API , I get error 403, Forbidden.
I'm using my normal login credentials that has access to activate.
Anyone knows how to use the activate API and/or how to get virtual Controller and IAP-VPN running ?
Tested with postman and curl:
curl -d "credential_0=${actusername}&credential_1=${actpassword}" -c Activate-cookie.txt -v https://activate.arubanetworks.com/LOGIN --trace /dev/stdout
https://support.hpe.com/hpesc/public/docDisplay?docId=a00120791en_us&page=GUID-538FAA17-AFA9-4F3E-A4C4-76532B0D15B6.html