Controllerless Networks

 View Only
last person joined: 2 days ago 

Instant Mode - the controllerless Wi-Fi solution that's easy to set up, is loaded with security and smarts, and won't break your budget
Back to discussions
Expand all | Collapse all

Aruba AP IPM

This thread has been viewed 11 times

  • 1.  Aruba AP IPM

    Posted 11 days ago

    Hi!

    Does anybody know if Aruba AP local GUI has IPM feature, because in Central there is IPM that you can push to all your APs. Also you can configure it through CLI, but if you have a cluster of APs and do it via CLI you can do it only on master AP and therefore it applies only on that AP, I guess.

    So my question is where to find IPM on IAP GUI?



  • 2.  RE: Aruba AP IPM
    Best Answer

    EMPLOYEE
    Posted 11 days ago

    Instant AP when managed locally requires configuration of IPM via the CLI.  IPM is a VC level configuration and applies to all IAPs in the swarm.



    ------------------------------
    Carson Hulcher, ACEX#110
    ------------------------------

    Original Message


  • 3.  RE: Aruba AP IPM

    EMPLOYEE
    Posted 11 days ago

    the cli commnd are 

    PS-Lvl1-b2:5b# conf t
    We now support CLI commit model, please type "commit apply" for configuration to take effect.
    PS-Lvl1-b2:5b (config) # ipm
    PS-Lvl1-b2:5b (ipm) # enable
    PS-Lvl1-b2:5b (ipm) #
    PS-Lvl1-b2:5b# commit apply
    committing configuration...
    configuration committed.
    PS-Lvl1-b2:5b#



    ------------------------------
    If my post was useful accept solution and/or give kudos.
    Any opinions expressed here are solely my own and not necessarily that of HPE or Aruba.
    ------------------------------

    Original Message