Security Training

 View Only
last person joined: 2 days ago 

Back to discussions
Expand all | Collapse all

Aruba NWS 1930 certifcate problem

This thread has been viewed 10 times

  • 1.  Aruba NWS 1930 certifcate problem

    Posted Aug 04, 2022 11:44 AM
    Dear Team,

    I am getting the below error on Aruba Network Switch 1930, Image attached for your reference i am also not able to open the swithc cli from Putty\TeraTerm Please advice.

    Also share hardening Guide for Aruba Network Switch



  • 2.  RE: Aruba NWS 1930 certifcate problem

    EMPLOYEE
    Posted Aug 05, 2022 09:02 AM
    You may be more successful at the Aruba Instant ON forum.

    However, the first field (Certificate) should have something that has ----BEGIN CERTIFICATE----; not CERTIFICATE REQUEST. The REQUEST you send to your CA, and the CERTIFICATE is what you normally get back from the CA.

    ------------------------------
    Herman Robers
    ------------------------
    If you have urgent issues, always contact your Aruba partner, distributor, or Aruba TAC Support. Check https://www.arubanetworks.com/support-services/contact-support/ for how to contact Aruba TAC. Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba Networks.

    In case your problem is solved, please invest the time to post a follow-up with the information on how you solved it. Others can benefit from that.
    ------------------------------

    Original Message