Wired Intelligent Edge

 View Only
last person joined: 10 hours ago 

Bring performance and reliability to your network with the HPE Aruba Networking Core, Aggregation, and Access layer switches. Discuss the latest features and functionality of your switching devices, and find ways to improve security across your network to bring together a mobile-first solution
Back to discussions
Expand all | Collapse all

ArubaOS-S Switches not dislaying IP addresses of clients using static IPs

This thread has been viewed 11 times

  • 1.  ArubaOS-S Switches not dislaying IP addresses of clients using static IPs

    Posted 21 days ago

    Hi

    Aruba 2930 switches running WC.16.11.13

    Have enabled

    IP tracker

    IP tracker probe-delay

    On the switches,which are all configured to perform mac.dot1x auth with dhcp snooping and device fingerprinting.I do get some

    static IPs defined but  not for all of them.

    Is there anything else we need to do to increase  number of static IP address detected ?

    A



  • 2.  RE: ArubaOS-S Switches not dislaying IP addresses of clients using static IPs

    EMPLOYEE
    Posted 20 days ago

    are these static IP clients that does not get detected,  silent clients?



    ------------------------------
    If my post was useful accept solution and/or give kudos.
    Any opinions expressed here are solely my own and not necessarily that of HPE or Aruba.
    ------------------------------

    Original Message


  • 3.  RE: ArubaOS-S Switches not dislaying IP addresses of clients using static IPs

    Posted 20 days ago
    Well we can see them in access tracker authenticating and cppm and tries its best to do the right thing.
    Reauth time is 60 mins and we see them reauth every interval.
    We have a fair number of devices with static IPs … just some of them don’t
    Sadly too difficult for client to switch to dhcp
    A
    Sent from my iPhone


    Original Message