And if you can make UDP port 4500 reachable to the controller in the factory, from your HQ, you can make the AP a Remote AP (RAP). Any Aruba AP can be configured as a remote AP.
------------------------------
Herman Robers
------------------------
If you have urgent issues, always contact your Aruba partner, distributor, or Aruba TAC Support. Check
https://www.arubanetworks.com/support-services/contact-support/ for how to contact Aruba TAC. Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba Networks.
In case your problem is solved, please invest the time to post a follow-up with the information on how you solved it. Others can benefit from that.
------------------------------
Original Message:
Sent: Mar 21, 2023 05:46 AM
From: NHN
Subject: Broadcast ssid's from a diffent location
You can provision one access point to the factory controller from HQ if it's reachable.
---------------------------------
Harendra
ACDX|ACEP|CWSP|
Original Message:
Sent: Mar 20, 2023
From: roughgod22
Subject: Broadcast ssid's from a diffent location
I think I am overthinking this but here is my situation. I need to broadcast the ssid's used at a remote factory in our headquarters office. I am trying to test new RF scanners and need the ssid's to be broadcast in my office. The factory and the office have separate controllers.
Do I need to configure vlans, firewall rules, and routes to get this to work, or is there an easier way?