Wireless Access

 View Only
last person joined: 21 hours ago 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

Cannot rdp or ping hostnames when connected to IAP-305

This thread has been viewed 8 times

  • 1.  Cannot rdp or ping hostnames when connected to IAP-305

    Posted Aug 15, 2022 06:18 AM
    I am getting the correct DNS server IP address in my ip configuration. There is something going on when connected to the wireless network in particular. Everything works fine using the IP address. I can ping devices including servers and can rdp into them. I get a non existent domain message.


  • 2.  RE: Cannot rdp or ping hostnames when connected to IAP-305

    EMPLOYEE
    Posted Aug 15, 2022 09:38 AM
    If it is a Windows-based computer, use nslookup on the command line to see what it says about the dns server.  Also do an ipconfig /all to see if the DNS server is correct.

    ------------------------------
    Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba Networks.

    HPE Design and Deploy Guides: https://community.arubanetworks.com/support/migrated-knowledge-base?attachments=&communitykey=dcc83c62-1a3a-4dd8-94dc-92968ea6fff1&pageindex=0&pagesize=12&search=&sort=most_recent&viewtype=card
    ------------------------------

    Original Message