The regulatory domain is tied to the hardware for legal reasons. You should not have US APs outside of US Territories, nor you should have RW APs inside; so the situation should not exist unless APs are shipped to places where they shouldn't.
------------------------------
Herman Robers
------------------------
If you have urgent issues, always contact your Aruba partner, distributor, or Aruba TAC Support. Check
https://www.arubanetworks.com/support-services/contact-support/ for how to contact Aruba TAC. Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba Networks.
In case your problem is solved, please invest the time to post a follow-up with the information on how you solved it. Others can benefit from that.
------------------------------
Original Message:
Sent: Jul 30, 2022 02:02 PM
From: Marco Gateño
Subject: Change regulatory domain via FW re-flahs
We have a number of AP's that are US regulatory domain, but our environment and cluster is all RW.
I am aware that you cannot mix them together, but I was hoping that there would be a way to change the regulatory domain via FW re-flash?
Thanks for the help.