I am working on configuring a ClearPass deployment for wired authentication with Aruba switches. We have configured local user roles on the 2930 and 2530 switches. On the 2930 switch, under the aaa authorization user-role <role-name> I can configure a command 'device' and 'port-mode' for the ports where IAPs are connected. This allows the IAP to authenticate to the switch port and the wireless clients authenticate to the SSID and not the wired port.
I am looking for the same command under the user-role for the 2530 switch and appears that this command is not available. Is there a different command for the 2530 so the AP can authenticate to the switch port but not the wireless clients behind the AP?
Thanks