Cloud Managed Networks

 View Only
last person joined: 2 days ago 

Forum to discuss all things related to HPE Aruba Networking Central and UXI Network Management, including deployment of managed networks, configuration, best practices, APIs, Cloud Guest, AIOps, Presence Analytics, and other included Applications
Back to discussions
Expand all | Collapse all

Configuring manual cluster

This thread has been viewed 11 times

  • 1.  Configuring manual cluster

    Posted Mar 20, 2024 07:25 PM

    Hello guys I'm in a situation in which I need to configure a manual cluster because will be using g CoA and also microbranch

    I have never done this before because I have configured it but with the automatic cluster.

    • On the group level, I go and turn the auto cluster off 
    • Click plus on clusters
    • Put a name of the cluster
    • check for coa and VPN termination for microbranch (ill have a remote ap so I guess the microbranch will work for that? the clients used to have some remote APs and we need to configure this)
    • The vrrp vlan could be the system vlan??
    • The vrrp IP is the Virtual IP address in which in my case ill add that one to Clearpass as NAD?
    • Do I need to fill ID and passphrase field?
    • Guess I will do this config at the group level.
    • Do I need to configure anything on the redundancy tab? or that's all? if not when do I need to configure something there?

    Thanks 



  • 2.  RE: Configuring manual cluster

    Posted Mar 22, 2024 09:16 AM

    Anyone?


    Original Message