APIN225 can refer to an AP-225 model, or an IAP-225-RW/US/JP/IL model. Please check the sticker on the back.
AP-225 cannot be converted to Instant mode.
If you have an Instant AP-225, and it initially works (as you mention), but after some time it gets some different configuration, it may be that the AP is registered in Activate to convert to a RAP, or connect to an Airwave server, or Aruba Central.
Where did you get these devices from? Could it be that these are still under management by a previous owner?
------------------------------
Herman Robers
------------------------
If you have urgent issues, always contact your Aruba partner, distributor, or Aruba TAC Support. Check
https://www.arubanetworks.com/support-services/contact-support/ for how to contact Aruba TAC. Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba Networks.
In case your problem is solved, please invest the time to post a follow-up with the information on how you solved it. Others can benefit from that.
------------------------------
Original Message:
Sent: Oct 20, 2022 04:55 AM
From: idham khaidir
Subject: Convert APIN 225 to IAP
We have APIN 225 that convert to IAP.
We have convert to Version:6.5.4.10 and configure it as standalone.
However after 5 days this IAP cannot broadcast SSID and I cannot login into web GUI console or SSH.
We need reset default again and configure it again.
How to solve this problem with IAP?