Hello,
I am working on setting up a few DHCP-Server Pools on a VSX Cluster. I followed this thread;
DHCP at Switch 8320 | Wired Intelligent Edge (arubanetworks.com), but the issue I am having is that I have DHCP-Server setup, the state and mode when I do show dhcp-server say operational and true, but I am not getting an IP Address.
This is how I had it before, and I was still having the same issues:
Configure Pool:
dhcp-server vrf default
pool DHCP_Test
range 10.1.1.1 10.1.1.154 prefix-len 24
dns-server 10.15.5.5
default-router 10.1.1.2
domain-name example.com
lease 00:10:00
exit
authoritative
enable
Connect the Pool and VLAN:
interface vlan 2
vsx-sync active-gateways
description Test_DHCP
ip mtu 9100
ip address 10.1.1.2/24
active-gateway ip mac 12:01:00:10:11:04
active-gateway ip 10.1.1.1
Assign interface to VLAN:
interface
no routing
no shutdown
vlan access 2
I feel like there is something I am missing, but I am not sure what...