I think that cannot be done through the GUI. Please reach out to Aruba TAC to report the issue. If it is a large number of switches, they might find a way to get the commands inserted through the API.
If it is a handful of switches, you could connect to the switch, enter central-support-mode, issue the commands to disable telnet and http-web, then disable support mode again:
sw00(config)# aruba-central support-mode enable
sw00(config)# no telnet-server
sw00(config)# no web-management plaintext
sw00(config)# aruba-central support-mode disable
The config should stay there even after central takes management control again.
------------------------------
Herman Robers
------------------------
If you have urgent issues, always contact your Aruba partner, distributor, or Aruba TAC Support. Check
https://www.arubanetworks.com/support-services/contact-support/ for how to contact Aruba TAC. Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba Networks.
In case your problem is solved, please invest the time to post a follow-up with the information on how you solved it. Others can benefit from that.
------------------------------
Original Message:
Sent: Nov 18, 2022 12:06 AM
From: Hal Douglas
Subject: Disable Web Interface on Switches from Central
Hi all,
I was hoping someone can answer a question for me:
How do you disable the (HTTP )WebUI and Telnet on AOS-S switches from Aruba Central? It's very simple on Central-Managed Access Points, you do it from Config>System: