Wireless Access

 View Only
last person joined: yesterday 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

Disabling Ports Using ACL (Aruba 7030)

This thread has been viewed 9 times

  • 1.  Disabling Ports Using ACL (Aruba 7030)

    Posted Mar 25, 2024 07:12 AM

    Afternoon,

    I'm a bit of a noob when it comes to Aruba wireless controllers and my question is likely very simple. Company would like networking to disable HTTP (port 80) on the mgmt IP. Controller is running OS 8.6. It looks like the only way to do this is via ACL. I'm hoping someone can confirm how this is setup. When I go to create a new rule, there are two options for a source so you can add an IP Address, would that be "addr_mask" or "host"? I'm guessing mask is the subnet mask?

    Is there anything else that has to be done for this to work? I don't have the option of testing in a lab so I want to ensure I get it right on the first try.

    Thank you!



  • 2.  RE: Disabling Ports Using ACL (Aruba 7030)

    EMPLOYEE
    Posted Mar 25, 2024 09:56 AM

    You'll probably want to refer to the AOS 8 Hardening Guide.



    ------------------------------
    Carson Hulcher, ACEX#110
    ------------------------------

    Original Message


  • 3.  RE: Disabling Ports Using ACL (Aruba 7030)

    Posted Mar 25, 2024 10:55 AM

    I found the 8.6 user guide and found the section that outlines when to use address mask or host. For specific IPv4, it's addr_mask. Couldnt find this answer in the hardening guide. Thanks for your response! 


    Original Message