Cloud Managed Networks

Hey everybody.

I installed a new 6000 cx switch 52 port at a customer.
I installed a sfp transceiver J4859D (which is unsupported) in one of the sfp ports.
The switch is uplinked via fibre and the sfp.
The switch is also acting as a core switch for other switches in the same building.

Everything is working excellent.

The issue is that I enabled all kinds of warnings and alarms in Aruba Central, and I get high CPU warning many times a day.
I can not figure out what is causing the high cpu warning.

Anybody have experience with high cpu on switches and figuring out what is causing that?

what version of firmware are you running on the CX6000 switch?

------------------------------
Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba.
------------------------------

Original Message:
Sent: Oct 12, 2022 07:58 AM
From: Jørgen Wasmuth
Subject: High cpu usage 6000 cx switch

Hey everybody.

I installed a new 6000 cx switch 52 port at a customer.
I installed a sfp transceiver J4859D (which is unsupported) in one of the sfp ports.
The switch is uplinked via fibre and the sfp.
The switch is also acting as a core switch for other switches in the same building.

Everything is working excellent.

The issue is that I enabled all kinds of warnings and alarms in Aruba Central, and I get high CPU warning many times a day.
I can not figure out what is causing the high cpu warning.

Anybody have experience with high cpu on switches and figuring out what is causing that?

The firmware is 10.10.1000
Original Message:
Sent: Oct 12, 2022 05:35 PM
From: Ariya Parsamanesh
Subject: High cpu usage 6000 cx switch

what version of firmware are you running on the CX6000 switch?

------------------------------
Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba.

Original Message:
Sent: Oct 12, 2022 07:58 AM
From: Jørgen Wasmuth
Subject: High cpu usage 6000 cx switch

Hey everybody.

I installed a new 6000 cx switch 52 port at a customer.
I installed a sfp transceiver J4859D (which is unsupported) in one of the sfp ports.
The switch is uplinked via fibre and the sfp.
The switch is also acting as a core switch for other switches in the same building.

Everything is working excellent.

The issue is that I enabled all kinds of warnings and alarms in Aruba Central, and I get high CPU warning many times a day.
I can not figure out what is causing the high cpu warning.

Anybody have experience with high cpu on switches and figuring out what is causing that?

check the release notes for firmware version 10.10.1010, perhaps it'll address it.
You can also try these command on the switch to see what is causing it

• top cpu
• show system
• show system resource-utilization

------------------------------
Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba.
------------------------------

Original Message:
Sent: Oct 13, 2022 03:48 AM
From: Jørgen Wasmuth
Subject: High cpu usage 6000 cx switch

The firmware is 10.10.1000
Original Message:
Sent: Oct 12, 2022 05:35 PM
From: Ariya Parsamanesh
Subject: High cpu usage 6000 cx switch

what version of firmware are you running on the CX6000 switch?

------------------------------
Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba.

Original Message:
Sent: Oct 12, 2022 07:58 AM
From: Jørgen Wasmuth
Subject: High cpu usage 6000 cx switch

Hey everybody.

I installed a new 6000 cx switch 52 port at a customer.
I installed a sfp transceiver J4859D (which is unsupported) in one of the sfp ports.
The switch is uplinked via fibre and the sfp.
The switch is also acting as a core switch for other switches in the same building.

Everything is working excellent.

The issue is that I enabled all kinds of warnings and alarms in Aruba Central, and I get high CPU warning many times a day.
I can not figure out what is causing the high cpu warning.

Anybody have experience with high cpu on switches and figuring out what is causing that?

hello,
I am facing the same issue.
Did you get any solution?
Original Message:
Sent: Oct 12, 2022 07:58 AM
From: Jørgen Wasmuth
Subject: High cpu usage 6000 cx switch

Hey everybody.

I installed a new 6000 cx switch 52 port at a customer.
I installed a sfp transceiver J4859D (which is unsupported) in one of the sfp ports.
The switch is uplinked via fibre and the sfp.
The switch is also acting as a core switch for other switches in the same building.

Everything is working excellent.

The issue is that I enabled all kinds of warnings and alarms in Aruba Central, and I get high CPU warning many times a day.
I can not figure out what is causing the high cpu warning.

Anybody have experience with high cpu on switches and figuring out what is causing that?

with CX switches, please ensure you are running the latest maintenance release.
for 10.10.x it is 10.10.1030
the release notes mentions that the high CPU spike is resolved.
https://www.arubanetworks.com/techdocs/AOS-CX/10.10/RN/rn_6000-6100_10-10-1030.pdf

------------------------------
If my post was useful accept solution and/or give kudos.
Any opinions expressed here are solely my own and not necessarily that of HPE or Aruba.
------------------------------

Original Message:
Sent: Dec 27, 2022 04:09 AM
From: gabriel assayag
Subject: High cpu usage 6000 cx switch

hello,
I am facing the same issue.
Did you get any solution?
Original Message:
Sent: Oct 12, 2022 07:58 AM
From: Jørgen Wasmuth
Subject: High cpu usage 6000 cx switch

Hey everybody.

I installed a new 6000 cx switch 52 port at a customer.
I installed a sfp transceiver J4859D (which is unsupported) in one of the sfp ports.
The switch is uplinked via fibre and the sfp.
The switch is also acting as a core switch for other switches in the same building.

Everything is working excellent.

The issue is that I enabled all kinds of warnings and alarms in Aruba Central, and I get high CPU warning many times a day.
I can not figure out what is causing the high cpu warning.

Anybody have experience with high cpu on switches and figuring out what is causing that?

Yes, I already tried this version.
I have now updated to the latest version 10.11.0001
And the problem continues.
Original Message:
Sent: Dec 27, 2022 06:02 PM
From: Ariya Parsamanesh
Subject: High cpu usage 6000 cx switch

with CX switches, please ensure you are running the latest maintenance release.
for 10.10.x it is 10.10.1030
the release notes mentions that the high CPU spike is resolved.
https://www.arubanetworks.com/techdocs/AOS-CX/10.10/RN/rn_6000-6100_10-10-1030.pdf

------------------------------
If my post was useful accept solution and/or give kudos.
Any opinions expressed here are solely my own and not necessarily that of HPE or Aruba.

Original Message:
Sent: Dec 27, 2022 04:09 AM
From: gabriel assayag
Subject: High cpu usage 6000 cx switch

hello,
I am facing the same issue.
Did you get any solution?
Original Message:
Sent: Oct 12, 2022 07:58 AM
From: Jørgen Wasmuth
Subject: High cpu usage 6000 cx switch

Hey everybody.

I installed a new 6000 cx switch 52 port at a customer.
I installed a sfp transceiver J4859D (which is unsupported) in one of the sfp ports.
The switch is uplinked via fibre and the sfp.
The switch is also acting as a core switch for other switches in the same building.

Everything is working excellent.

The issue is that I enabled all kinds of warnings and alarms in Aruba Central, and I get high CPU warning many times a day.
I can not figure out what is causing the high cpu warning.

Anybody have experience with high cpu on switches and figuring out what is causing that?

please contact Aruba Support for it then.

------------------------------
If my post was useful accept solution and/or give kudos.
Any opinions expressed here are solely my own and not necessarily that of HPE or Aruba.
------------------------------

Original Message:
Sent: Dec 28, 2022 01:58 AM
From: gabriel assayag
Subject: High cpu usage 6000 cx switch

Yes, I already tried this version.
I have now updated to the latest version 10.11.0001
And the problem continues.
Original Message:
Sent: Dec 27, 2022 06:02 PM
From: Ariya Parsamanesh
Subject: High cpu usage 6000 cx switch

with CX switches, please ensure you are running the latest maintenance release.
for 10.10.x it is 10.10.1030
the release notes mentions that the high CPU spike is resolved.
https://www.arubanetworks.com/techdocs/AOS-CX/10.10/RN/rn_6000-6100_10-10-1030.pdf

------------------------------
If my post was useful accept solution and/or give kudos.
Any opinions expressed here are solely my own and not necessarily that of HPE or Aruba.

Original Message:
Sent: Dec 27, 2022 04:09 AM
From: gabriel assayag
Subject: High cpu usage 6000 cx switch

hello,
I am facing the same issue.
Did you get any solution?
Original Message:
Sent: Oct 12, 2022 07:58 AM
From: Jørgen Wasmuth
Subject: High cpu usage 6000 cx switch

Hey everybody.

I installed a new 6000 cx switch 52 port at a customer.
I installed a sfp transceiver J4859D (which is unsupported) in one of the sfp ports.
The switch is uplinked via fibre and the sfp.
The switch is also acting as a core switch for other switches in the same building.

Everything is working excellent.

The issue is that I enabled all kinds of warnings and alarms in Aruba Central, and I get high CPU warning many times a day.
I can not figure out what is causing the high cpu warning.

Anybody have experience with high cpu on switches and figuring out what is causing that?

Release notes say:  Workaround: The spike is generally short-lived and can be ignored.
Original Message:
Sent: Dec 28, 2022 01:58 AM
From: gabriel assayag
Subject: High cpu usage 6000 cx switch

Yes, I already tried this version.
I have now updated to the latest version 10.11.0001
And the problem continues.
Original Message:
Sent: Dec 27, 2022 06:02 PM
From: Ariya Parsamanesh
Subject: High cpu usage 6000 cx switch

with CX switches, please ensure you are running the latest maintenance release.
for 10.10.x it is 10.10.1030
the release notes mentions that the high CPU spike is resolved.
https://www.arubanetworks.com/techdocs/AOS-CX/10.10/RN/rn_6000-6100_10-10-1030.pdf

------------------------------
If my post was useful accept solution and/or give kudos.
Any opinions expressed here are solely my own and not necessarily that of HPE or Aruba.

Original Message:
Sent: Dec 27, 2022 04:09 AM
From: gabriel assayag
Subject: High cpu usage 6000 cx switch

hello,
I am facing the same issue.
Did you get any solution?
Original Message:
Sent: Oct 12, 2022 07:58 AM
From: Jørgen Wasmuth
Subject: High cpu usage 6000 cx switch

Hey everybody.

I installed a new 6000 cx switch 52 port at a customer.
I installed a sfp transceiver J4859D (which is unsupported) in one of the sfp ports.
The switch is uplinked via fibre and the sfp.
The switch is also acting as a core switch for other switches in the same building.

Everything is working excellent.

The issue is that I enabled all kinds of warnings and alarms in Aruba Central, and I get high CPU warning many times a day.
I can not figure out what is causing the high cpu warning.

Anybody have experience with high cpu on switches and figuring out what is causing that?

Hi,

we have the same issue here with 3 Aruba 6100 on the last firmware 10.12.0006.

We have open a support ticket on aruba support, try they recommandations with spanning tree, loop protect... without significatives improvement.

You find a solution on our side ?

Thank you.

Original Message:
Sent: Oct 12, 2022 07:58 AM
From: JW94
Subject: High cpu usage 6000 cx switch

Hey everybody.

I installed a new 6000 cx switch 52 port at a customer.
I installed a sfp transceiver J4859D (which is unsupported) in one of the sfp ports.
The switch is uplinked via fibre and the sfp.
The switch is also acting as a core switch for other switches in the same building.

Everything is working excellent.

The issue is that I enabled all kinds of warnings and alarms in Aruba Central, and I get high CPU warning many times a day.
I can not figure out what is causing the high cpu warning.

Anybody have experience with high cpu on switches and figuring out what is causing that?

Hi,

we have the same issue here with 3 Aruba 6100 on the last firmware 10.12.0006.

You find a solution on our side ?

Thank you.

Original Message:
Sent: Oct 12, 2022 07:58 AM
From: JW94
Subject: High cpu usage 6000 cx switch

Hey everybody.

I installed a new 6000 cx switch 52 port at a customer.
I installed a sfp transceiver J4859D (which is unsupported) in one of the sfp ports.
The switch is uplinked via fibre and the sfp.
The switch is also acting as a core switch for other switches in the same building.

Everything is working excellent.

The issue is that I enabled all kinds of warnings and alarms in Aruba Central, and I get high CPU warning many times a day.
I can not figure out what is causing the high cpu warning.

Anybody have experience with high cpu on switches and figuring out what is causing that?