Network Management

 View Only
last person joined: 3 days ago 

Keep an informative eye on your network with HPE Aruba Networking network management solutions
Back to discussions
Expand all | Collapse all

How do I add aps and switches to Ariwave

This thread has been viewed 2 times

  • 1.  How do I add aps and switches to Ariwave

    Posted Feb 06, 2023 03:43 AM

    Hello, there are 200 505aps, 7 2930F wireless switches, 2 MD and two MM virtual machines in my current project. I have built Ariwave. May I ask how to add switches and APS into Ariwave? Is there a manual?

    thankyou for you sharing!


  • 2.  RE: How do I add aps and switches to Ariwave

    EMPLOYEE
    Posted Feb 06, 2023 08:14 AM
    Here is the AirWave documentation homepage: https://www.arubanetworks.com/techdocs/AirWave/82151/webhelp/Content/AWUserGuide/Chapter7_DailyTasks/home_documentation.htm

    ------------------------------
    Herman Robers
    ------------------------
    If you have urgent issues, always contact your Aruba partner, distributor, or Aruba TAC Support. Check https://www.arubanetworks.com/support-services/contact-support/ for how to contact Aruba TAC. Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba Networks.

    In case your problem is solved, please invest the time to post a follow-up with the information on how you solved it. Others can benefit from that.
    ------------------------------

    Original Message