Network Management

 View Only
last person joined: 2 days ago 

Keep an informative eye on your network with HPE Aruba Networking network management solutions
Back to discussions
Expand all | Collapse all

How to configure VLAN betwenn 2 Aruba Switch

This thread has been viewed 19 times

  • 1.  How to configure VLAN betwenn 2 Aruba Switch

    Posted 13 days ago

    Hello,

    I have a vlan 1 and vlan 120 on my network.

    VLAN 1 is my client & server lan , with dhcp etc... for example : 172.16.1.0/24

    Vlan 120 IP Network is : 10.0.120.0/24 with gateway on my FireWall Interface : i Use it for manage my network devices.

    i Already have 2 aruba CX6100 connected to each other by this configuration : 

    These 2 Switchs are reachable by their IP , for example : 10.0.120.1 and 10.0.120.2 : Work Fine.

    And when i connected a device on one of this switch on an unttagged port vlan 1 : i get connected with my server DHCP etc.... : Work Fine

    I just bought a new Aruba Instant On 1930 , i set this ip to 10.0.120.3, i connected it on the port 18 of the first CX6100 Switch to port 48 of the new one.

    I set up the port 18 from the CX6100 like that ( same config as port 28) : 

    And the port 48 of the new switch like that : 

    With this configuration i can't reach the new switch with this IP : 10.0.120.3 :(  ping and http doesn't work.

    I don't see what i've missed ? 

    Any idea ?

    Thank's 



  • 2.  RE: How to configure VLAN betwenn 2 Aruba Switch

    Posted 12 days ago

    I fix the issue : 

    My configuration was correct but what i have to do after was :

    Change the VLAN ID for the management interface on the Network Setup page

    And add a route like this , for get access from my computer who is on the vlan 1 ;) 

    Everything works fine now.


    Original Message