Controllerless Networks

 View Only
last person joined: 6 hours ago 

Instant Mode - the controllerless Wi-Fi solution that's easy to set up, is loaded with security and smarts, and won't break your budget
Back to discussions
Expand all | Collapse all

How to convert from CAP to IAP (Aruba 550)

This thread has been viewed 13 times

  • 1.  How to convert from CAP to IAP (Aruba 550)

    Posted 20 days ago

    Hi,

    Is there a way to convert Aruba 550 access points from CAP to IAP without physical access?

    They are currently connected to a controller + MM. I tried to reboot them into a Instant VLAN but they keep as CAP.

    And it is not clear to me if ap convert is only for old non-universal APs, as the commands says it will burn the country code into the AP and it will make it non-reversible.

    Thanks



  • 2.  RE: How to convert from CAP to IAP (Aruba 550)
    Best Answer

    EMPLOYEE
    Posted 20 days ago

    Go to the WebUI for the controller currently acting as the active controller for the AP, under Maintenance / Access Point is the option to boot the AP into Instant mode.  Make sure to disable any controller discovery (DHCP, DNS) currently in place for that AP otherwise you'll just convert back to CAP.



    ------------------------------
    Carson Hulcher, ACEX#110
    ------------------------------

    Original Message


  • 3.  RE: How to convert from CAP to IAP (Aruba 550)

    Posted 18 days ago

    Worked fine :)

    Thanks.


    Original Message