total num of users (OID: 1.3.6.1.4.1.14823.2.2.1.4.1.1.0) does not work, like toal num of stations and total num of access points, too.
I tried all the mibs from "aruba-mibs_8.10.0.12_89862"
Original Message:
Sent: Jun 27, 2024 04:56 AM
From: cordless
Subject: How to monitor Aruba Conductor via SNMP for Number of connected APs and users?
You can download the MIBs from Support Portal.
Look into aruba-user.my
-- wlsxUserAllInfoGroup contains information about the users in the controller.
wlsxTotalNumOfUsers OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Total Number of the users.
"
::= { wlsxUserAllInfoGroup 1 }
If you want to drill it down per Controller use aruba-switch.my:
-- wlsxUserInfoGroup contains information about the users connected to the switch
Original Message:
Sent: Jun 27, 2024 02:06 AM
From: r.grossmann
Subject: How to monitor Aruba Conductor via SNMP for Number of connected APs and users?
Push...
Anyone an idea?
Original Message:
Sent: Jun 05, 2024 05:11 AM
From: r.grossmann
Subject: How to monitor Aruba Conductor via SNMP for Number of connected APs and users?
Hi,
I do have a Aruba Virtual Conductor (8.10.0.12 LSR), two 9004 Controller and two 9240 Controller.
I want to monitor the number/count of connected APs and Clients from the Conductor via SNMP. Is it possible and if, then how? The GUI displays the information, but I dont get it by SNMP.
I tried the aruba-wlan,my and several others, but still no result. For Example (result as zero...):
GUI:
optionally: If it is possible it would be nice to monitor all the connected Access Points , maybe there is a table for that?
Edit:
CLI provides following information:
But how can I access these information via SNMP?
I don't want to monitor the 4 Controllers as I want to monitor the sum of all APs and users over all both Controller Clusters.
Thanks and kind regards
Robert
Edit:
Rest API Call would also be okay. I tried with a API showcommand, but I do not know how to filter it or how to get single value from that...
Does not work with '...' like in the example:C:\_IT>curl -b "aruba-cookie" -X GET -i --header "X-CSRF-Token:MzNhODJhYzYtZTQzNi00NDE2LThlMDctZTgw" '"https://v-it142.ewr.local:4343/v1/configuration/showcommand?command=show+ap+database-summary"&filter=[ { "AP Database Summary" : { "$eq" : "Total Up" } } ]'curl: (3) URL rejected: Port number was not a decimal number between 0 and 65535Der Befehl "filter" ist entweder falsch geschrieben oderkonnte nicht gefunden werden.without '...' the filter error still occurs:C:\_IT>curl -b "aruba-cookie" -X GET -i --header "X-CSRF-Token:MzNhODJhYzYtZTQzNi00NDE2LThlMDctZTgw" https://v-it142.ewr.local:4343/v1/configuration/showcommand?command=show+ap+database-summary&filter=[ { "Object" : { "$eq" : "Total Up" } } ]orC:\_IT>curl -b "aruba-cookie" -X GET -i --header "X-CSRF-Token:MzNhODJhYzYtZTQzNi00NDE2LThlMDctZTgw" https://v-it142.ewr.local:4343/v1/configuration/showcommand?command=show+ap+database-summary&filter=[{"AP Database Summary" : { "$eq" : "Total Up" } } ]HTTP/1.1 200 OKDate: Wed, 05 Jun 2024 13:18:05 GMTServer: ApacheExpires: 0X-Frame-Options: SAMEORIGINX-XSS-Protection: 1; mode=blockX-UA-Compatible: IE=edge;IE=11;IE=10;IE=9Strict-Transport-Security: max-age=31536000Expires: 0Set-Cookie: SESSION=OWRhMDcyY2QtODdiNy00ZGQwLTgyY2MtNGM1; path=/; HttpOnly; SameSite=Lax;;Secure;Content-Length: 2244Content-Type: application/json{ "AP Database Summary": [ { "AP Mode": "Access Points", "Active Up": "0", "RAP Down": "0", "RAP Rebooting*": "0", "RAP Up": "0", "RAP Upgrading*": "0", "Standby Up": "0", "Total Down": "1", "Total Rebooting*": "0", "Total Up": "96", <== I want to monitor THIS value ! "Total Upgrading*": "0" }, ... "_meta": [ "AP Mode", "Total Up", "Total Down", "Total Upgrading*", "Total Rebooting*", "RAP Up", "RAP Down", "RAP Upgrading*", "RAP Rebooting*", "Active Up", "Standby Up" ]}Der Befehl "filter" ist entweder falsch geschrieben oderkonnte nicht gefunden werden.
Edit 2:
show global-user-table count could be the solution for User count, but also here the filter does not work. I need the value only
C:\_IT>curl -b "aruba-cookie" -X GET -i --header "X-CSRF-Token:NDk4M2RjZjgtMTNlOS00OTJmLWIwOGYtODkx" https://v-it142.ewr.local:4343/v1/configuration/showcommand?command=show+global-user-table+count &filter=[{"OBJECT" : { "$eq" : "The number of global users" }}]HTTP/1.1 200 OKDate: Wed, 05 Jun 2024 14:39:35 GMTServer: ApacheExpires: 0X-Frame-Options: SAMEORIGINX-XSS-Protection: 1; mode=blockX-UA-Compatible: IE=edge;IE=11;IE=10;IE=9Strict-Transport-Security: max-age=31536000Expires: 0Set-Cookie: SESSION=YWNkNmI2Y2ItODlkMi00NzI3LWE4OWMtMWQ2; path=/; HttpOnly; SameSite=Lax;;Secure;Content-Length: 59Content-Type: application/json{ "_data": [ "The number of global users : 150" <== I want to monitor THIS value ! ]}Der Befehl "filter" ist entweder falsch geschrieben oderkonnte nicht gefunden werden.