I am at a gridlock trying to test a virtual gateway on my home ESXi lab. I configured the VGW identical to my 9004 with the only difference being that I will be using a different internet provider and a different LAN subnet. The VGW runs the same software 10.5.1.0_89166. I chose the L3 solution.
Towards the 9004 everything works, the tunnel comes online and I can ping servers in my internal network.
On the Virtual Gateway I am unable to set up an IPSEC tunnel. It seems that IPSEC is not operational but I am uncertain how to test this.
While reviewing Aruba Central I did notice some differences between the 9004 and the new virtual gateways:
- In overview the device, while being only is not registering uptime
- The control option is UP however there are no interfaces registered
- WAN interface menu is empty
- LAN interface menu is empty
- The Microbranch show two tunnels but the tunnel to the VGW never sends anything back.
Anyone has some suggestions?
------------------------------
Martijn van Overbeek
Architect, Netcraftsmen a BlueAlly Company
------------------------------