Wireless Access

 View Only
last person joined: 20 hours ago 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

how to turn 2.4 and 5GHZ radio off through cli in AOS10 environment

This thread has been viewed 5 times

  • 1.  how to turn 2.4 and 5GHZ radio off through cli in AOS10 environment

    Posted 9 days ago

    we have setup our wireless environment in AOS10 Aruba Central and trying to turn off radio 0, 1, 2 . it takes the value through Aruba Central but wondering if there is specific cli command



  • 2.  RE: how to turn 2.4 and 5GHZ radio off through cli in AOS10 environment

    EMPLOYEE
    Posted 9 days ago

    In AOS 10, configuration should be done through Central. Even if you would be able to change things on the CLI, it will be returned back as soon as the AP is connected to Central again. What is the use-case, or what is it that you try to achieve that you can't do through Central?



    ------------------------------
    Herman Robers
    ------------------------
    If you have urgent issues, always contact your Aruba partner, distributor, or Aruba TAC Support. Check https://www.arubanetworks.com/support-services/contact-support/ for how to contact Aruba TAC. Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba Networks.

    In case your problem is solved, please invest the time to post a follow-up with the information on how you solved it. Others can benefit from that.
    ------------------------------

    Original Message