Hello! I have a HPE 5710 (JL585A)
I found that it has been unable to load the saved Configuration file
as follows
Starting…
Press Ctrl+D to access BASIC BOOT MENU...
Press Ctrl+T to start heavy memory test
*************************************************** ****************************
* *
* HPE FF 5710 48SFP+ 6QSFP+ or 2QSFP28 Switch BOOTROM, Version 235 *
* *
*************************************************** ****************************
Copyright (c) 2010-2019 Hewlett Packard Enterprise Development LP
Creation Date: Apr 15 2019,16:05:50
CPU Clock Speed: 1000MHz
Memory Size: 4096MB
Flash Size: 1024MB
CPLD Version: 002/002
PCB Version: Ver.A
Mac Address: EC9B8BCAB0E6
PEX mode is enabled.
Press Ctrl+B to access EXTENDED BOOT MENU...0
Loading the main image files...
Loading file flash:/5710-cmw710-system-r2702p01.bin.............................
................................................................. ............................
.....Done.
Loading file flash:/5710-cmw710-boot-r2702p01.bin.............Done.
Image file flash:/5710-cmw710-boot-r2702p01.bin is self-decompressing.....
................................................................. .........Done.
System is starting...
Cryptographic algorithms tests passed.
Configuration file is skipped.
Performing automatic configuration... Press CTRL_C or CTRL_D to break.
Automatic configuration attempt: 1.
Not ready for automatic configuration: no interface available.
Waiting for the next...
Automatic configuration is aborted.
Line aux0 is available.
Press ENTER to get started.
-------------------------------------------------- ----------------------------------------
<HPE>show startup
MainBoard:
Current startup saved-configuration file: NULL
Next main startup saved-configuration file: NULL
Next backup startup saved-configuration file: NULL
<HPE>save
The current configuration will be written to the device. Are you sure? [Y/N]:Y
Please input the file name(*.cfg)[flash:/startup.cfg]
(To leave the existing filename unchanged, press the enter key):
flash:/startup.cfg exists, overwrite? [Y/N]:Y
Validating file. Please wait...
Saved the current configuration to mainboard device successfully.
<HPE>show startup
MainBoard:
Current startup saved-configuration file: NULL
Next main startup saved-configuration file: NULL
Next backup startup saved-configuration file: NULL
<HPE>
-------------------------------------------------- ------------------
Password recovery capability is enabled.
EXTENDED BOOT MENU
1. Download image to flash
2. Select image to boot
3. Display all files in flash
4. Delete file from flash
5. Restore to factory default configuration
6. Enter BootRom upgrade menu
7. Skip current system configuration
8. Set switch startup mode
9. Set default boot storage medium
0.Reboot
Ctrl+Z: Access EXTENDED ASSISTANT MENU
Ctrl+F: Format file system
Ctrl+P: Change authentication for console login
Ctrl+Y: Change Work Mode
Ctrl+R: Download image to SDRAM and run
Ctrl+C: Display Copyright
Enter your choice(0-9): 2
1. Set image file
2. Set bin file
3. Set configuration file
0. Return to boot menu
Enter your choice(0-3): 3
File Number File Size(bytes) File Name
================================================== ==============================
1 8766 flash:/testcfg.cfg
2(b) 8766 flash:/test.cfg
3 8424 flash:/starcfg.cfg
4(*) 8766 flash:/startup.cfg
Free space: 817242112 bytes
(*)-with main attribute
(b)-with backup attribute
(*b)-with both main and backup attribute
Please input the file number to change: 4
-------------------------------------------------- ------------------
But BOOT MENU please tell me is there any way to make it automatically load the configuration after booting into the system??