Hi michael16,
as for my understanding the firmware on both switches is the same. Both run ComwareOS 7.10 (to my knowledge).
They are on different sub- oder feature-releases, but that doesn't mean they work differently.
You're right, this can mean that some commands are having a little different syntax.
I don't know about any conversion table for those changes.
Imho: I'd just try every command in your Backup once on the new Switch and "correct" (adjust) the Conf-Backup with a Tool like Notepad++ (and replace feature).
Is may be a little bit more work than just restoring it,and reacting only to errors.
This gives you actually the possibility to find obsolete config lines with no more company/customer use.
It happens all the time, that someone leaves you a little big surprise (trust me, i know)
Also you will practice the new commands.
Have a great Day
------------------------------
prefers to not experiment with live customer equipment...
------------------------------
Original Message:
Sent: Nov 16, 2022 04:29 PM
From: Michael Konze
Subject: HPE FlexFabric 5930 to 5945 migration
I am currently working on trying to determine the possibility of migrating a system from a 5930 to a 5945. I know there are some slight differences in the configuration syntax (how to configure an ACL for example). I am wondering if there is a tool or published set of changes between the firmware. I am also wondering if it is possible to upgrade the firmware of the 5930 prior to the migration so that the configs will work automatically on the 5945.