I am getting alot of messages in my logs like the following:
Sep 20 15:18:11 hm0so01w AP:hm0so01w <134.183.69.78 AC:A3:1E:C5:DC:F8> awc[4880]: wsc: wsc_service_wd_fd(1889), poll write, sevice fd 13
Sep 20 15:18:11 hm0so01w AP:hm0so01w <134.183.69.78 AC:A3:1E:C5:DC:F8> awc[4880]: wsc: callback_central(1701) LWS_CALLBACK_CLEAR_MODE_POLL_FD, POLLOUT, dispatcher input_write_id=269154464
Sep 20 15:18:11 hm0so01w AP:hm0so01w <134.183.69.78 AC:A3:1E:C5:DC:F8> cli[4883]: wsc: prepare_and_send_IapTrap_data(3420) trap data get from snmp, length 129.
Sep 20 15:18:11 hm0so01w AP:hm0so01w <134.183.69.78 AC:A3:1E:C5:DC:F8> cli[4883]: wsc: central_trap_encode(3400) trap bytes size=206
Sep 20 15:18:11 hm0so01w AP:hm0so01w <134.183.69.78 AC:A3:1E:C5:DC:F8> cli[4883]: wsc: send papi message to awc, srvid 1, type POST_REQUEST(11), raw message len 222. use_payloadfile=0
Sep 20 15:18:11 hm0so01w AP:hm0so01w <134.183.69.78 AC:A3:1E:C5:DC:F8> cli[4883]: wsc: prepare_and_send_IapClitrap_data(3641) No CLI trap data, return
Sep 20 15:18:11 hm0so01w AP:hm0so01w <134.183.69.78 AC:A3:1E:C5:DC:F8> awc[4880]: wsc: callback_central(1679) LWS_CALLBACK_SET_MODE_POLL_FD POLLOUT, DispAddInput input_write_id = 269129472
Sep 20 15:18:11 hm0so01w AP:hm0so01w <134.183.69.78 AC:A3:1E:C5:DC:F8> awc[4880]: wsc: wsc_service_wd_fd(1889), poll write, sevice fd 13
Sep 20 15:18:11 hm0so01w AP:hm0so01w <134.183.69.78 AC:A3:1E:C5:DC:F8> awc[4880]: wsc: callback_central(1701) LWS_CALLBACK_CLEAR_MODE_POLL_FD, POLLOUT, dispatcher input_write_id=269129472
Sep 20 15:18:15 hm0so01w AP:hm0so01w <134.183.69.78 AC:A3:1E:C5:DC:F8> awc[4880]: wsc: callback_central(1679) LWS_CALLBACK_SET_MODE_POLL_FD POLLOUT, DispAddInput input_write_id = 269128712
I believe these are for central (could be wrong but) how do I stop these messages from being sent to the syslog? I know if I change the syslog to error it will stop them but I loose other messages that I want to get if I do that.
any suggestions would be appreciated.