Controllerless Networks

 View Only
last person joined: yesterday 

Instant Mode - the controllerless Wi-Fi solution that's easy to set up, is loaded with security and smarts, and won't break your budget
Back to discussions
Expand all | Collapse all

IAP-275 Error

This thread has been viewed 14 times

  • 1.  IAP-275 Error

    Posted Oct 28, 2022 10:07 AM
    bought an IAP-275 to group with our current IAP-205's.   Connects to VC ok, shows up etc.  But no clients.   The status light is red.  I had manually upgraded it to the same version number of the IAP-205's.   6.5.1.0-4.3.1   Tauras/Centaurasl.

    system log errors:
    Oct 27 17:17:11 sapd[2993]: <311020> <ERRS> |AP SFFH-Outdoor@10.10.10.226 sapd| An internal system error has occurred at file sapd_instant.c function send_config_to_stm line 3292 error send_config_to_stm: stm_msg fails to get aruba101 bssid.
    Oct 27 17:17:11 sapd[2993]: <311020> <ERRS> |AP SFFH-Outdoor@10.10.10.226 sapd| An internal system error has occurred at file sapd_instant.c function send_pwr_status_to_stm line 3062 error send_pwr_status_to_stm: fail to get aruba000 bssid.
    Oct 27 17:17:11 sapd[2993]: <311020> <ERRS> |AP SFFH-Outdoor@10.10.10.226 sapd| An internal system error has occurred at file sapd_instant.c function send_pwr_status_to_stm line 3062 error send_pwr_status_to_stm: fail to get aruba001 bssid.
    Oct 27 17:17:11 sapd[2993]: <311020> <ERRS> |AP SFFH-Outdoor@10.10.10.226 sapd| An internal system error has occurred at file sapd_instant.c function send_pwr_status_to_stm line 3062 error send_pwr_status_to_stm: fail to get aruba002 bssid.
    Oct 27 17:17:11 sapd[2993]: <311020> <ERRS> |AP SFFH-Outdoor@10.10.10.226 sapd| An internal system error has occurred at file sapd_instant.c function send_pwr_status_to_stm line 3062 error send_pwr_status_to_stm: fail to get aruba003 bssid.
    Oct 27 17:17:11 sapd[2993]: <311020> <ERRS> |AP SFFH-Outdoor@10.10.10.226 sapd| An internal system error has occurred at file sapd_instant.c function send_pwr_status_to_stm line 3062 error send_pwr_status_to_stm: fail to get aruba100 bssid.
    Oct 27 17:17:11 sapd[2993]: <311020> <ERRS> |AP SFFH-Outdoor@10.10.10.226 sapd| An internal system error has occurred at file sapd_instant.c function send_pwr_status_to_stm line 3062 error send_pwr_status_to_stm: fail to get aruba101 bssid.
    Oct 27 17:17:11 sapd[2993]: <311020> <ERRS> |AP SFFH-Outdoor@10.10.10.226 sapd| An internal system error has occurred at file sapd_instant.c function send_pwr_status_to_stm line 3062 error send_pwr_status_to_stm: fail to get aruba102 bssid.
    Oct 27 17:17:11 sapd[2993]: <311020> <ERRS> |AP SFFH-Outdoor@10.10.10.226 sapd| An internal system error has occurred at file sapd_instant.c function send_pwr_status_to_stm line 3062 error send_pwr_status_to_stm: fail to get aruba103 bssid.

    ???
    Thanks for any insights.


  • 2.  RE: IAP-275 Error

    EMPLOYEE
    Posted Oct 28, 2022 05:54 PM
    where did you buy this IAP-275 from ? Make sure this AP is being powered by PoE-AT

    ------------------------------
    Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba.
    ------------------------------

    Original Message


  • 3.  RE: IAP-275 Error

    Posted Oct 31, 2022 03:11 PM
    Yes, my bad for not reviewing the requirements before hooking up.  I noticed the spec and ordered a POE-AT injector on friday.  I will update once I receive and test.
    thanks,
    Tom
    Original Message


  • 4.  RE: IAP-275 Error

    Posted Nov 01, 2022 12:32 PM
    Hooked up to 802.3-at POE device and it works perfectly.   Shame on me for not reading the instructions.
    Original Message