Hi,
I am setting up an Aruba IAP335 controller. Trying to test the BLE IoT service (using WebSocket). I have set up and used both
radio-profile and transportProfile.
Aruba_ap1# show running-config | include iot
iot radio-profile test
iot transportProfile chorus_test
iot use-radio-profile test
iot useTransportProfile chorus_test
I also set up my WebSocket server and can receive some beacon. However, the beacon has no BleData included. It only contains the following data:
meta {
version: 1
access_token: "aabbccddee"
}
reporter {
name: "Aruba_ap1"
mac: "......"
ipv4: "192.168.1.93"
hwType: "AP-335"
swVersion: "8.8.0.0-8.8.0.0-mm-dev"
swBuild: "77366"
time: 1655077928
}
Don't know what's going on. One thing I noticed is that the APB seems to be disabled (see the information highlighted below). Even although I chose "Beaconing" option.
Radio Configuration
-------------------
Item Value
---- -----
Radio Information TI ONBOARD Internal BLE
Radio Profile Type --
Zigbee Supported No
APB MAC Address f4:5e:ab:bb:49:87
Operational Mode Beaconing (APB: Disabled)
Operational BluOS FW Version OAD B 1.2-42
Bundled BluOS Upgrade Enabled (-1)
Bundled BluOS Images Bank A(/aruba/bin/UpgradeImage_AP_OAD-A_1.2-42.bin) Bank B(/aruba/bin/Beacon_AP_OAD-B_1.2-42.bin)
OTA FW BluOS Upgrade Disabled
FW Stack Supported No
Don't know if this is the root cause and how to solve it. Any suggestions? Thtanks!