Network Management

Hi,

is there a possibility at IMC to automatically deactivate switch ports that have not been used for a certain period of time, e.g. 30 days, and possibly even assign them to an extra VLAN?

Thank you and best regards
Jürgen

Hi,
You can assign extra vlans or change port admin status from this Resources page, but you need to manually select the down ports. The port status is displayed when you select the interfaces.


Original Message:
Sent: Jan 24, 2023 06:23 AM
From: jeberhardt
Subject: IMC Automatically disable unused switchports

Hi,

is there a possibility at IMC to automatically deactivate switch ports that have not been used for a certain period of time, e.g. 30 days, and possibly even assign them to an extra VLAN?

Thank you and best regards
Jürgen

Hi
I've been reading along here, I'm also interested in this topic.
But unfortunately I can't select an interface. Which switches or which OS system is supported here?

Original Message:
Sent: Jan 27, 2023 04:59 AM
From: pbit
Subject: IMC Automatically disable unused switchports

Hi,
You can assign extra vlans or change port admin status from this Resources page, but you need to manually select the down ports. The port status is displayed when you select the interfaces.


Original Message:
Sent: Jan 24, 2023 06:23 AM
From: jeberhardt
Subject: IMC Automatically disable unused switchports

Hi,

is there a possibility at IMC to automatically deactivate switch ports that have not been used for a certain period of time, e.g. 30 days, and possibly even assign them to an extra VLAN?

Thank you and best regards
Jürgen

Hi Ley_1,
This works for SNMP devices that support the Interface MIB.  
IMC 708 is working for Aruba devices.  Device List lists all devices and then Interface List lists the device interfaces. 
In theory all devices which are SNMP read-write  should be selectable.  Please show one device page with device type and the list of interfaces with their type.

Kind Regards
Paola
Original Message:
Sent: Jan 30, 2023 03:18 AM
From: ley_1
Subject: IMC Automatically disable unused switchports

Hi
I've been reading along here, I'm also interested in this topic.
But unfortunately I can't select an interface. Which switches or which OS system is supported here?

Original Message:
Sent: Jan 27, 2023 04:59 AM
From: pbit
Subject: IMC Automatically disable unused switchports

Hi,
You can assign extra vlans or change port admin status from this Resources page, but you need to manually select the down ports. The port status is displayed when you select the interfaces.


Original Message:
Sent: Jan 24, 2023 06:23 AM
From: jeberhardt
Subject: IMC Automatically disable unused switchports

Hi,

is there a possibility at IMC to automatically deactivate switch ports that have not been used for a certain period of time, e.g. 30 days, and possibly even assign them to an extra VLAN?

Thank you and best regards
Jürgen

Hi,
we only use HPE - Provision/Procurve switches
from the models:
2530
5400
5400R zl2
5400R zl2 with VSF
3500
2910
2920
2930
etc.
all with SNMPv3 r/w
FW version up to date

Not a single one is shown
Maybe only CX switches work?

Tom
Original Message:
Sent: Jan 30, 2023 04:14 AM
From: pbit
Subject: IMC Automatically disable unused switchports

Hi Ley_1,
This works for SNMP devices that support the Interface MIB.
IMC 708 is working for Aruba devices.  Device List lists all devices and then Interface List lists the device interfaces.
In theory all devices which are SNMP read-write  should be selectable.  Please show one device page with device type and the list of interfaces with their type.

Kind Regards
Paola
Original Message:
Sent: Jan 30, 2023 03:18 AM
From: ley_1
Subject: IMC Automatically disable unused switchports

Hi
I've been reading along here, I'm also interested in this topic.
But unfortunately I can't select an interface. Which switches or which OS system is supported here?

Original Message:
Sent: Jan 27, 2023 04:59 AM
From: pbit
Subject: IMC Automatically disable unused switchports

Hi,
You can assign extra vlans or change port admin status from this Resources page, but you need to manually select the down ports. The port status is displayed when you select the interfaces.


Original Message:
Sent: Jan 24, 2023 06:23 AM
From: jeberhardt
Subject: IMC Automatically disable unused switchports

Hi,

is there a possibility at IMC to automatically deactivate switch ports that have not been used for a certain period of time, e.g. 30 days, and possibly even assign them to an extra VLAN?

Thank you and best regards
Jürgen

Hi Tom,  sorry,  I take it back,  with IMC v708  I can only configure up/down port with Comware devices. I am checking with the lab if and when we can add support to CX and Procurve/Provision switches. It will take some time to get agreement and a plan.
Kind Regards
Paola


Original Message:
Sent: Jan 30, 2023 04:32 AM
From: ley_1
Subject: IMC Automatically disable unused switchports

Hi,
we only use HPE - Provision/Procurve switches
from the models:
2530
5400
5400R zl2
5400R zl2 with VSF
3500
2910
2920
2930
etc.
all with SNMPv3 r/w
FW version up to date

Not a single one is shown
Maybe only CX switches work?

Tom
Original Message:
Sent: Jan 30, 2023 04:14 AM
From: pbit
Subject: IMC Automatically disable unused switchports

Hi Ley_1,
This works for SNMP devices that support the Interface MIB.
IMC 708 is working for Aruba devices.  Device List lists all devices and then Interface List lists the device interfaces.
In theory all devices which are SNMP read-write  should be selectable.  Please show one device page with device type and the list of interfaces with their type.

Kind Regards
Paola
Original Message:
Sent: Jan 30, 2023 03:18 AM
From: ley_1
Subject: IMC Automatically disable unused switchports

Hi
I've been reading along here, I'm also interested in this topic.
But unfortunately I can't select an interface. Which switches or which OS system is supported here?

Original Message:
Sent: Jan 27, 2023 04:59 AM
From: pbit
Subject: IMC Automatically disable unused switchports

Hi,
You can assign extra vlans or change port admin status from this Resources page, but you need to manually select the down ports. The port status is displayed when you select the interfaces.


Original Message:
Sent: Jan 24, 2023 06:23 AM
From: jeberhardt
Subject: IMC Automatically disable unused switchports

Hi,

is there a possibility at IMC to automatically deactivate switch ports that have not been used for a certain period of time, e.g. 30 days, and possibly even assign them to an extra VLAN?

Thank you and best regards
Jürgen