Wireless Access

Hello,

First of all, thank you for your various help which will surely give me ideas. I have a problem getting ip address from a specific vlan that uses a windows DHCP server.

 In fact since last time, when I connect I cannot obtain an IP address on my AP 505 access point.

The explanation seemed clearer to me with a diagram. Do you have an idea ?

Knowing that if I untagged the terminal on vlan 1 the IP assignment works correctly for the ssid... Thanks!

Is your DHCP server plugged into an access port on the switch that is configured for VLAN 1?  Or the default gateway for VLAN 1 has a DHCP helper configuration pointing at the DHCP server?

Hello,

First of all, thank you for your various help which will surely give me ideas. I have a problem getting ip address from a specific vlan that uses a windows DHCP server.

 In fact since last time, when I connect I cannot obtain an IP address on my AP 505 access point.

The explanation seemed clearer to me with a diagram. Do you have an idea ?

Knowing that if I untagged the terminal on vlan 1 the IP assignment works correctly for the ssid... Thanks!

Hello Chulcher,

Thanks for your reply. My DHCP server plugged into an access port on the switch VLAN1

Original Message:
Sent: Mar 26, 2024 09:05 AM
From: chulcher
Subject: Impossible to obtain ip address from windows server dhcp

Is your DHCP server plugged into an access port on the switch that is configured for VLAN 1?  Or the default gateway for VLAN 1 has a DHCP helper configuration pointing at the DHCP server?

------------------------------
Carson Hulcher, ACEX#110

Original Message:
Sent: Mar 26, 2024 04:16 AM
From: VincenP
Subject: Impossible to obtain ip address from windows server dhcp

Hello,

First of all, thank you for your various help which will surely give me ideas. I have a problem getting ip address from a specific vlan that uses a windows DHCP server.

 In fact since last time, when I connect I cannot obtain an IP address on my AP 505 access point.

The explanation seemed clearer to me with a diagram. Do you have an idea ?

Knowing that if I untagged the terminal on vlan 1 the IP assignment works correctly for the ssid... Thanks!

It's worked if i use vlan 1 on my acces point and update ip to 172.16.79.x

But i wanna used vlan 23 because my network 172.16.79.x are no more ip adresss

Original Message:
Sent: Mar 27, 2024 03:45 AM
From: VincenP
Subject: Impossible to obtain ip address from windows server dhcp

Hello Chulcher,

Thanks for your reply. My DHCP server plugged into an access port on the switch VLAN1

Original Message:
Sent: Mar 26, 2024 09:05 AM
From: chulcher
Subject: Impossible to obtain ip address from windows server dhcp

Is your DHCP server plugged into an access port on the switch that is configured for VLAN 1?  Or the default gateway for VLAN 1 has a DHCP helper configuration pointing at the DHCP server?

------------------------------
Carson Hulcher, ACEX#110

Original Message:
Sent: Mar 26, 2024 04:16 AM
From: VincenP
Subject: Impossible to obtain ip address from windows server dhcp

Hello,

First of all, thank you for your various help which will surely give me ideas. I have a problem getting ip address from a specific vlan that uses a windows DHCP server.

 In fact since last time, when I connect I cannot obtain an IP address on my AP 505 access point.

The explanation seemed clearer to me with a diagram. Do you have an idea ?

Knowing that if I untagged the terminal on vlan 1 the IP assignment works correctly for the ssid... Thanks!

Hi 

i think vlan 1 should not be labeled on the ap. Your ssid vlan can be replaced with another vlan. The planning of vlan 1 is wrong.

It's worked if i use vlan 1 on my acces point and update ip to 172.16.79.x

But i wanna used vlan 23 because my network 172.16.79.x are no more ip adresss

Original Message:
Sent: Mar 27, 2024 03:45 AM
From: VincenP
Subject: Impossible to obtain ip address from windows server dhcp

Hello Chulcher,

Thanks for your reply. My DHCP server plugged into an access port on the switch VLAN1

Original Message:
Sent: Mar 26, 2024 09:05 AM
From: chulcher
Subject: Impossible to obtain ip address from windows server dhcp

Is your DHCP server plugged into an access port on the switch that is configured for VLAN 1?  Or the default gateway for VLAN 1 has a DHCP helper configuration pointing at the DHCP server?

------------------------------
Carson Hulcher, ACEX#110

Original Message:
Sent: Mar 26, 2024 04:16 AM
From: VincenP
Subject: Impossible to obtain ip address from windows server dhcp

Hello,

First of all, thank you for your various help which will surely give me ideas. I have a problem getting ip address from a specific vlan that uses a windows DHCP server.

 In fact since last time, when I connect I cannot obtain an IP address on my AP 505 access point.

The explanation seemed clearer to me with a diagram. Do you have an idea ?

Knowing that if I untagged the terminal on vlan 1 the IP assignment works correctly for the ssid... Thanks!

Hi Leo,

Thanks for your reply , but i can't change vlan 1 on the ap.  Otherwise I have to change all my switches  config etc .. Unless there is a way to access the 172.16.79.x network from another VLAN from the ap?

Hi 

i think vlan 1 should not be labeled on the ap. Your ssid vlan can be replaced with another vlan. The planning of vlan 1 is wrong.

It's worked if i use vlan 1 on my acces point and update ip to 172.16.79.x

But i wanna used vlan 23 because my network 172.16.79.x are no more ip adresss

Original Message:
Sent: Mar 27, 2024 03:45 AM
From: VincenP
Subject: Impossible to obtain ip address from windows server dhcp

Hello Chulcher,

Thanks for your reply. My DHCP server plugged into an access port on the switch VLAN1

Original Message:
Sent: Mar 26, 2024 09:05 AM
From: chulcher
Subject: Impossible to obtain ip address from windows server dhcp

Is your DHCP server plugged into an access port on the switch that is configured for VLAN 1?  Or the default gateway for VLAN 1 has a DHCP helper configuration pointing at the DHCP server?

------------------------------
Carson Hulcher, ACEX#110

Original Message:
Sent: Mar 26, 2024 04:16 AM
From: VincenP
Subject: Impossible to obtain ip address from windows server dhcp

Hello,

First of all, thank you for your various help which will surely give me ideas. I have a problem getting ip address from a specific vlan that uses a windows DHCP server.

 In fact since last time, when I connect I cannot obtain an IP address on my AP 505 access point.

The explanation seemed clearer to me with a diagram. Do you have an idea ?

Knowing that if I untagged the terminal on vlan 1 the IP assignment works correctly for the ssid... Thanks!

Hi Leo,

Thanks for your reply , but i can't change vlan 1 on the ap.  Otherwise I have to change all my switches  config etc .. Unless there is a way to access the 172.16.79.x network from another VLAN from the ap?

Hi 

i think vlan 1 should not be labeled on the ap. Your ssid vlan can be replaced with another vlan. The planning of vlan 1 is wrong.

It's worked if i use vlan 1 on my acces point and update ip to 172.16.79.x

But i wanna used vlan 23 because my network 172.16.79.x are no more ip adresss

Original Message:
Sent: Mar 27, 2024 03:45 AM
From: VincenP
Subject: Impossible to obtain ip address from windows server dhcp

Hello Chulcher,

Thanks for your reply. My DHCP server plugged into an access port on the switch VLAN1

Original Message:
Sent: Mar 26, 2024 09:05 AM
From: chulcher
Subject: Impossible to obtain ip address from windows server dhcp

Is your DHCP server plugged into an access port on the switch that is configured for VLAN 1?  Or the default gateway for VLAN 1 has a DHCP helper configuration pointing at the DHCP server?

------------------------------
Carson Hulcher, ACEX#110

Original Message:
Sent: Mar 26, 2024 04:16 AM
From: VincenP
Subject: Impossible to obtain ip address from windows server dhcp

Hello,

First of all, thank you for your various help which will surely give me ideas. I have a problem getting ip address from a specific vlan that uses a windows DHCP server.

 In fact since last time, when I connect I cannot obtain an IP address on my AP 505 access point.

The explanation seemed clearer to me with a diagram. Do you have an idea ?

Knowing that if I untagged the terminal on vlan 1 the IP assignment works correctly for the ssid... Thanks!

With a client connected, run "show clients status <mac-addr>" and see if the client is really getting assigned to VLAN 1.  If they are, then the problem is likely that you've not changed the IAP's "Switch uplink native VLAN" setting so the IAP doesn't know to tag VLAN 1 ("show datapath bridge", PVID for br0 needs to be 23).

------------------------------
Carson Hulcher, ACEX#110

Original Message:
Sent: Mar 27, 2024 08:57 AM
From: VincenP
Subject: Impossible to obtain ip address from windows server dhcp

Hi Leo,

Thanks for your reply , but i can't change vlan 1 on the ap.  Otherwise I have to change all my switches  config etc .. Unless there is a way to access the 172.16.79.x network from another VLAN from the ap?

Original Message:
Sent: Mar 27, 2024 06:26 AM
From: leo.ma
Subject: Impossible to obtain ip address from windows server dhcp

Hi 

i think vlan 1 should not be labeled on the ap. Your ssid vlan can be replaced with another vlan. The planning of vlan 1 is wrong.

------------------------------
If my post was useful, please Accept Solution and Give Kudos.

leo ma

ACMX

Original Message:
Sent: Mar 27, 2024 04:15 AM
From: VincenP
Subject: Impossible to obtain ip address from windows server dhcp

It's worked if i use vlan 1 on my acces point and update ip to 172.16.79.x

But i wanna used vlan 23 because my network 172.16.79.x are no more ip adresss

Original Message:
Sent: Mar 27, 2024 03:45 AM
From: VincenP
Subject: Impossible to obtain ip address from windows server dhcp

Hello Chulcher,

Thanks for your reply. My DHCP server plugged into an access port on the switch VLAN1

Original Message:
Sent: Mar 26, 2024 09:05 AM
From: chulcher
Subject: Impossible to obtain ip address from windows server dhcp

Is your DHCP server plugged into an access port on the switch that is configured for VLAN 1?  Or the default gateway for VLAN 1 has a DHCP helper configuration pointing at the DHCP server?

------------------------------
Carson Hulcher, ACEX#110

Original Message:
Sent: Mar 26, 2024 04:16 AM
From: VincenP
Subject: Impossible to obtain ip address from windows server dhcp

Hello,

First of all, thank you for your various help which will surely give me ideas. I have a problem getting ip address from a specific vlan that uses a windows DHCP server.

 In fact since last time, when I connect I cannot obtain an IP address on my AP 505 access point.

The explanation seemed clearer to me with a diagram. Do you have an idea ?

Knowing that if I untagged the terminal on vlan 1 the IP assignment works correctly for the ssid... Thanks!

Hello Chulcher,

Thanks for your reply , i think your answer help me so much.

The client retrieves the correct VLAN 1

You're right the pvid for br0 is currently 1 but how can I change? Are there any other changes that need to be made? Below are the commands. Thank you!

Original Message:
Sent: Mar 27, 2024 09:40 AM
From: chulcher
Subject: Impossible to obtain ip address from windows server dhcp

With a client connected, run "show clients status <mac-addr>" and see if the client is really getting assigned to VLAN 1.  If they are, then the problem is likely that you've not changed the IAP's "Switch uplink native VLAN" setting so the IAP doesn't know to tag VLAN 1 ("show datapath bridge", PVID for br0 needs to be 23).

------------------------------
Carson Hulcher, ACEX#110

Original Message:
Sent: Mar 27, 2024 08:57 AM
From: VincenP
Subject: Impossible to obtain ip address from windows server dhcp

Hi Leo,

Thanks for your reply , but i can't change vlan 1 on the ap.  Otherwise I have to change all my switches  config etc .. Unless there is a way to access the 172.16.79.x network from another VLAN from the ap?

Original Message:
Sent: Mar 27, 2024 06:26 AM
From: leo.ma
Subject: Impossible to obtain ip address from windows server dhcp

Hi 

i think vlan 1 should not be labeled on the ap. Your ssid vlan can be replaced with another vlan. The planning of vlan 1 is wrong.

------------------------------
If my post was useful, please Accept Solution and Give Kudos.

leo ma

ACMX

Original Message:
Sent: Mar 27, 2024 04:15 AM
From: VincenP
Subject: Impossible to obtain ip address from windows server dhcp

It's worked if i use vlan 1 on my acces point and update ip to 172.16.79.x

But i wanna used vlan 23 because my network 172.16.79.x are no more ip adresss

Original Message:
Sent: Mar 27, 2024 03:45 AM
From: VincenP
Subject: Impossible to obtain ip address from windows server dhcp

Hello Chulcher,

Thanks for your reply. My DHCP server plugged into an access port on the switch VLAN1

Original Message:
Sent: Mar 26, 2024 09:05 AM
From: chulcher
Subject: Impossible to obtain ip address from windows server dhcp

Is your DHCP server plugged into an access port on the switch that is configured for VLAN 1?  Or the default gateway for VLAN 1 has a DHCP helper configuration pointing at the DHCP server?

------------------------------
Carson Hulcher, ACEX#110

Original Message:
Sent: Mar 26, 2024 04:16 AM
From: VincenP
Subject: Impossible to obtain ip address from windows server dhcp

Hello,

First of all, thank you for your various help which will surely give me ideas. I have a problem getting ip address from a specific vlan that uses a windows DHCP server.

 In fact since last time, when I connect I cannot obtain an IP address on my AP 505 access point.

The explanation seemed clearer to me with a diagram. Do you have an idea ?

Knowing that if I untagged the terminal on vlan 1 the IP assignment works correctly for the ssid... Thanks!

https://www.arubanetworks.com/techdocs/CLI-Bank/Content/instant/enet-vlan.htm

or in the UI, the Advanced options of the System menu.

Hello Chulcher,

Thanks for your reply , i think your answer help me so much.

The client retrieves the correct VLAN 1

You're right the pvid for br0 is currently 1 but how can I change? Are there any other changes that need to be made? Below are the commands. Thank you!

Original Message:
Sent: Mar 27, 2024 09:40 AM
From: chulcher
Subject: Impossible to obtain ip address from windows server dhcp

With a client connected, run "show clients status <mac-addr>" and see if the client is really getting assigned to VLAN 1.  If they are, then the problem is likely that you've not changed the IAP's "Switch uplink native VLAN" setting so the IAP doesn't know to tag VLAN 1 ("show datapath bridge", PVID for br0 needs to be 23).

------------------------------
Carson Hulcher, ACEX#110

Original Message:
Sent: Mar 27, 2024 08:57 AM
From: VincenP
Subject: Impossible to obtain ip address from windows server dhcp

Hi Leo,

Thanks for your reply , but i can't change vlan 1 on the ap.  Otherwise I have to change all my switches  config etc .. Unless there is a way to access the 172.16.79.x network from another VLAN from the ap?

Original Message:
Sent: Mar 27, 2024 06:26 AM
From: leo.ma
Subject: Impossible to obtain ip address from windows server dhcp

Hi 

i think vlan 1 should not be labeled on the ap. Your ssid vlan can be replaced with another vlan. The planning of vlan 1 is wrong.

------------------------------
If my post was useful, please Accept Solution and Give Kudos.

leo ma

ACMX

Original Message:
Sent: Mar 27, 2024 04:15 AM
From: VincenP
Subject: Impossible to obtain ip address from windows server dhcp

It's worked if i use vlan 1 on my acces point and update ip to 172.16.79.x

But i wanna used vlan 23 because my network 172.16.79.x are no more ip adresss

Original Message:
Sent: Mar 27, 2024 03:45 AM
From: VincenP
Subject: Impossible to obtain ip address from windows server dhcp

Hello Chulcher,

Thanks for your reply. My DHCP server plugged into an access port on the switch VLAN1

Original Message:
Sent: Mar 26, 2024 09:05 AM
From: chulcher
Subject: Impossible to obtain ip address from windows server dhcp

Is your DHCP server plugged into an access port on the switch that is configured for VLAN 1?  Or the default gateway for VLAN 1 has a DHCP helper configuration pointing at the DHCP server?

------------------------------
Carson Hulcher, ACEX#110

Original Message:
Sent: Mar 26, 2024 04:16 AM
From: VincenP
Subject: Impossible to obtain ip address from windows server dhcp

Hello,

First of all, thank you for your various help which will surely give me ideas. I have a problem getting ip address from a specific vlan that uses a windows DHCP server.

 In fact since last time, when I connect I cannot obtain an IP address on my AP 505 access point.

The explanation seemed clearer to me with a diagram. Do you have an idea ?

Knowing that if I untagged the terminal on vlan 1 the IP assignment works correctly for the ssid... Thanks!

Yes i have tried this configuration before but same result my clients can't obtain dhcp ip from windows dhcp server.. :(

https://www.arubanetworks.com/techdocs/CLI-Bank/Content/instant/enet-vlan.htm

or in the UI, the Advanced options of the System menu.

Hello Chulcher,

Thanks for your reply , i think your answer help me so much.

The client retrieves the correct VLAN 1

You're right the pvid for br0 is currently 1 but how can I change? Are there any other changes that need to be made? Below are the commands. Thank you!

Original Message:
Sent: Mar 27, 2024 09:40 AM
From: chulcher
Subject: Impossible to obtain ip address from windows server dhcp

With a client connected, run "show clients status <mac-addr>" and see if the client is really getting assigned to VLAN 1.  If they are, then the problem is likely that you've not changed the IAP's "Switch uplink native VLAN" setting so the IAP doesn't know to tag VLAN 1 ("show datapath bridge", PVID for br0 needs to be 23).

------------------------------
Carson Hulcher, ACEX#110

Original Message:
Sent: Mar 27, 2024 08:57 AM
From: VincenP
Subject: Impossible to obtain ip address from windows server dhcp

Hi Leo,

Thanks for your reply , but i can't change vlan 1 on the ap.  Otherwise I have to change all my switches  config etc .. Unless there is a way to access the 172.16.79.x network from another VLAN from the ap?

Original Message:
Sent: Mar 27, 2024 06:26 AM
From: leo.ma
Subject: Impossible to obtain ip address from windows server dhcp

Hi 

i think vlan 1 should not be labeled on the ap. Your ssid vlan can be replaced with another vlan. The planning of vlan 1 is wrong.

------------------------------
If my post was useful, please Accept Solution and Give Kudos.

leo ma

ACMX

Original Message:
Sent: Mar 27, 2024 04:15 AM
From: VincenP
Subject: Impossible to obtain ip address from windows server dhcp

It's worked if i use vlan 1 on my acces point and update ip to 172.16.79.x

But i wanna used vlan 23 because my network 172.16.79.x are no more ip adresss

Original Message:
Sent: Mar 27, 2024 03:45 AM
From: VincenP
Subject: Impossible to obtain ip address from windows server dhcp

Hello Chulcher,

Thanks for your reply. My DHCP server plugged into an access port on the switch VLAN1

Original Message:
Sent: Mar 26, 2024 09:05 AM
From: chulcher
Subject: Impossible to obtain ip address from windows server dhcp

Is your DHCP server plugged into an access port on the switch that is configured for VLAN 1?  Or the default gateway for VLAN 1 has a DHCP helper configuration pointing at the DHCP server?

------------------------------
Carson Hulcher, ACEX#110

Original Message:
Sent: Mar 26, 2024 04:16 AM
From: VincenP
Subject: Impossible to obtain ip address from windows server dhcp

Hello,

First of all, thank you for your various help which will surely give me ideas. I have a problem getting ip address from a specific vlan that uses a windows DHCP server.

 In fact since last time, when I connect I cannot obtain an IP address on my AP 505 access point.

The explanation seemed clearer to me with a diagram. Do you have an idea ?

Knowing that if I untagged the terminal on vlan 1 the IP assignment works correctly for the ssid... Thanks!

Set a static IP for the client, when connected to the wireless can the client ping the DHCP server?

Yes i have tried this configuration before but same result my clients can't obtain dhcp ip from windows dhcp server.. :(

https://www.arubanetworks.com/techdocs/CLI-Bank/Content/instant/enet-vlan.htm

or in the UI, the Advanced options of the System menu.

Hello Chulcher,

Thanks for your reply , i think your answer help me so much.

The client retrieves the correct VLAN 1

You're right the pvid for br0 is currently 1 but how can I change? Are there any other changes that need to be made? Below are the commands. Thank you!

Original Message:
Sent: Mar 27, 2024 09:40 AM
From: chulcher
Subject: Impossible to obtain ip address from windows server dhcp

With a client connected, run "show clients status <mac-addr>" and see if the client is really getting assigned to VLAN 1.  If they are, then the problem is likely that you've not changed the IAP's "Switch uplink native VLAN" setting so the IAP doesn't know to tag VLAN 1 ("show datapath bridge", PVID for br0 needs to be 23).

------------------------------
Carson Hulcher, ACEX#110

Original Message:
Sent: Mar 27, 2024 08:57 AM
From: VincenP
Subject: Impossible to obtain ip address from windows server dhcp

Hi Leo,

Thanks for your reply , but i can't change vlan 1 on the ap.  Otherwise I have to change all my switches  config etc .. Unless there is a way to access the 172.16.79.x network from another VLAN from the ap?

Original Message:
Sent: Mar 27, 2024 06:26 AM
From: leo.ma
Subject: Impossible to obtain ip address from windows server dhcp

Hi 

i think vlan 1 should not be labeled on the ap. Your ssid vlan can be replaced with another vlan. The planning of vlan 1 is wrong.

------------------------------
If my post was useful, please Accept Solution and Give Kudos.

leo ma

ACMX

Original Message:
Sent: Mar 27, 2024 04:15 AM
From: VincenP
Subject: Impossible to obtain ip address from windows server dhcp

It's worked if i use vlan 1 on my acces point and update ip to 172.16.79.x

But i wanna used vlan 23 because my network 172.16.79.x are no more ip adresss

Original Message:
Sent: Mar 27, 2024 03:45 AM
From: VincenP
Subject: Impossible to obtain ip address from windows server dhcp

Hello Chulcher,

Thanks for your reply. My DHCP server plugged into an access port on the switch VLAN1

Original Message:
Sent: Mar 26, 2024 09:05 AM
From: chulcher
Subject: Impossible to obtain ip address from windows server dhcp

Is your DHCP server plugged into an access port on the switch that is configured for VLAN 1?  Or the default gateway for VLAN 1 has a DHCP helper configuration pointing at the DHCP server?

------------------------------
Carson Hulcher, ACEX#110

Original Message:
Sent: Mar 26, 2024 04:16 AM
From: VincenP
Subject: Impossible to obtain ip address from windows server dhcp

Hello,

First of all, thank you for your various help which will surely give me ideas. I have a problem getting ip address from a specific vlan that uses a windows DHCP server.

 In fact since last time, when I connect I cannot obtain an IP address on my AP 505 access point.

The explanation seemed clearer to me with a diagram. Do you have an idea ?

Knowing that if I untagged the terminal on vlan 1 the IP assignment works correctly for the ssid... Thanks!

I tried with static ip same result , i can't ping dhcp server.

Set a static IP for the client, when connected to the wireless can the client ping the DHCP server?

Yes i have tried this configuration before but same result my clients can't obtain dhcp ip from windows dhcp server.. :(

https://www.arubanetworks.com/techdocs/CLI-Bank/Content/instant/enet-vlan.htm

or in the UI, the Advanced options of the System menu.

Hello Chulcher,

Thanks for your reply , i think your answer help me so much.

The client retrieves the correct VLAN 1

You're right the pvid for br0 is currently 1 but how can I change? Are there any other changes that need to be made? Below are the commands. Thank you!

Original Message:
Sent: Mar 27, 2024 09:40 AM
From: chulcher
Subject: Impossible to obtain ip address from windows server dhcp

With a client connected, run "show clients status <mac-addr>" and see if the client is really getting assigned to VLAN 1.  If they are, then the problem is likely that you've not changed the IAP's "Switch uplink native VLAN" setting so the IAP doesn't know to tag VLAN 1 ("show datapath bridge", PVID for br0 needs to be 23).

------------------------------
Carson Hulcher, ACEX#110

Original Message:
Sent: Mar 27, 2024 08:57 AM
From: VincenP
Subject: Impossible to obtain ip address from windows server dhcp

Hi Leo,

Thanks for your reply , but i can't change vlan 1 on the ap.  Otherwise I have to change all my switches  config etc .. Unless there is a way to access the 172.16.79.x network from another VLAN from the ap?

Original Message:
Sent: Mar 27, 2024 06:26 AM
From: leo.ma
Subject: Impossible to obtain ip address from windows server dhcp

Hi 

i think vlan 1 should not be labeled on the ap. Your ssid vlan can be replaced with another vlan. The planning of vlan 1 is wrong.

------------------------------
If my post was useful, please Accept Solution and Give Kudos.

leo ma

ACMX

Original Message:
Sent: Mar 27, 2024 04:15 AM
From: VincenP
Subject: Impossible to obtain ip address from windows server dhcp

It's worked if i use vlan 1 on my acces point and update ip to 172.16.79.x

But i wanna used vlan 23 because my network 172.16.79.x are no more ip adresss

Original Message:
Sent: Mar 27, 2024 03:45 AM
From: VincenP
Subject: Impossible to obtain ip address from windows server dhcp

Hello Chulcher,

Thanks for your reply. My DHCP server plugged into an access port on the switch VLAN1

Original Message:
Sent: Mar 26, 2024 09:05 AM
From: chulcher
Subject: Impossible to obtain ip address from windows server dhcp

Is your DHCP server plugged into an access port on the switch that is configured for VLAN 1?  Or the default gateway for VLAN 1 has a DHCP helper configuration pointing at the DHCP server?

------------------------------
Carson Hulcher, ACEX#110

Original Message:
Sent: Mar 26, 2024 04:16 AM
From: VincenP
Subject: Impossible to obtain ip address from windows server dhcp

Hello,

First of all, thank you for your various help which will surely give me ideas. I have a problem getting ip address from a specific vlan that uses a windows DHCP server.

 In fact since last time, when I connect I cannot obtain an IP address on my AP 505 access point.

The explanation seemed clearer to me with a diagram. Do you have an idea ?

Knowing that if I untagged the terminal on vlan 1 the IP assignment works correctly for the ssid... Thanks!

I think my configuration was wrong into my router 

but i don't know why... :/

I tried with static ip same result , i can't ping dhcp server.

Set a static IP for the client, when connected to the wireless can the client ping the DHCP server?

Yes i have tried this configuration before but same result my clients can't obtain dhcp ip from windows dhcp server.. :(

https://www.arubanetworks.com/techdocs/CLI-Bank/Content/instant/enet-vlan.htm

or in the UI, the Advanced options of the System menu.

Hello Chulcher,

Thanks for your reply , i think your answer help me so much.

The client retrieves the correct VLAN 1

You're right the pvid for br0 is currently 1 but how can I change? Are there any other changes that need to be made? Below are the commands. Thank you!

Original Message:
Sent: Mar 27, 2024 09:40 AM
From: chulcher
Subject: Impossible to obtain ip address from windows server dhcp

With a client connected, run "show clients status <mac-addr>" and see if the client is really getting assigned to VLAN 1.  If they are, then the problem is likely that you've not changed the IAP's "Switch uplink native VLAN" setting so the IAP doesn't know to tag VLAN 1 ("show datapath bridge", PVID for br0 needs to be 23).

------------------------------
Carson Hulcher, ACEX#110

Original Message:
Sent: Mar 27, 2024 08:57 AM
From: VincenP
Subject: Impossible to obtain ip address from windows server dhcp

Hi Leo,

Thanks for your reply , but i can't change vlan 1 on the ap.  Otherwise I have to change all my switches  config etc .. Unless there is a way to access the 172.16.79.x network from another VLAN from the ap?

Original Message:
Sent: Mar 27, 2024 06:26 AM
From: leo.ma
Subject: Impossible to obtain ip address from windows server dhcp

Hi 

i think vlan 1 should not be labeled on the ap. Your ssid vlan can be replaced with another vlan. The planning of vlan 1 is wrong.

------------------------------
If my post was useful, please Accept Solution and Give Kudos.

leo ma

ACMX

Original Message:
Sent: Mar 27, 2024 04:15 AM
From: VincenP
Subject: Impossible to obtain ip address from windows server dhcp

It's worked if i use vlan 1 on my acces point and update ip to 172.16.79.x

But i wanna used vlan 23 because my network 172.16.79.x are no more ip adresss

Original Message:
Sent: Mar 27, 2024 03:45 AM
From: VincenP
Subject: Impossible to obtain ip address from windows server dhcp

Hello Chulcher,

Thanks for your reply. My DHCP server plugged into an access port on the switch VLAN1

Original Message:
Sent: Mar 26, 2024 09:05 AM
From: chulcher
Subject: Impossible to obtain ip address from windows server dhcp

Is your DHCP server plugged into an access port on the switch that is configured for VLAN 1?  Or the default gateway for VLAN 1 has a DHCP helper configuration pointing at the DHCP server?

------------------------------
Carson Hulcher, ACEX#110

Original Message:
Sent: Mar 26, 2024 04:16 AM
From: VincenP
Subject: Impossible to obtain ip address from windows server dhcp

Hello,

First of all, thank you for your various help which will surely give me ideas. I have a problem getting ip address from a specific vlan that uses a windows DHCP server.

 In fact since last time, when I connect I cannot obtain an IP address on my AP 505 access point.

The explanation seemed clearer to me with a diagram. Do you have an idea ?

Knowing that if I untagged the terminal on vlan 1 the IP assignment works correctly for the ssid... Thanks!

So you have things working?  If not, you might create a new version of your diagram that actually shows all of what is connected where.  There may be some assumptions being made that aren't true.

I think my configuration was wrong into my router 

but i don't know why... :/

I tried with static ip same result , i can't ping dhcp server.

Set a static IP for the client, when connected to the wireless can the client ping the DHCP server?

Yes i have tried this configuration before but same result my clients can't obtain dhcp ip from windows dhcp server.. :(

https://www.arubanetworks.com/techdocs/CLI-Bank/Content/instant/enet-vlan.htm

or in the UI, the Advanced options of the System menu.

Hello Chulcher,

Thanks for your reply , i think your answer help me so much.

The client retrieves the correct VLAN 1

You're right the pvid for br0 is currently 1 but how can I change? Are there any other changes that need to be made? Below are the commands. Thank you!

Original Message:
Sent: Mar 27, 2024 09:40 AM
From: chulcher
Subject: Impossible to obtain ip address from windows server dhcp

With a client connected, run "show clients status <mac-addr>" and see if the client is really getting assigned to VLAN 1.  If they are, then the problem is likely that you've not changed the IAP's "Switch uplink native VLAN" setting so the IAP doesn't know to tag VLAN 1 ("show datapath bridge", PVID for br0 needs to be 23).

------------------------------
Carson Hulcher, ACEX#110

Original Message:
Sent: Mar 27, 2024 08:57 AM
From: VincenP
Subject: Impossible to obtain ip address from windows server dhcp

Hi Leo,

Thanks for your reply , but i can't change vlan 1 on the ap.  Otherwise I have to change all my switches  config etc .. Unless there is a way to access the 172.16.79.x network from another VLAN from the ap?

Original Message:
Sent: Mar 27, 2024 06:26 AM
From: leo.ma
Subject: Impossible to obtain ip address from windows server dhcp

Hi 

i think vlan 1 should not be labeled on the ap. Your ssid vlan can be replaced with another vlan. The planning of vlan 1 is wrong.

------------------------------
If my post was useful, please Accept Solution and Give Kudos.

leo ma

ACMX

Original Message:
Sent: Mar 27, 2024 04:15 AM
From: VincenP
Subject: Impossible to obtain ip address from windows server dhcp

It's worked if i use vlan 1 on my acces point and update ip to 172.16.79.x

But i wanna used vlan 23 because my network 172.16.79.x are no more ip adresss

Original Message:
Sent: Mar 27, 2024 03:45 AM
From: VincenP
Subject: Impossible to obtain ip address from windows server dhcp

Hello Chulcher,

Thanks for your reply. My DHCP server plugged into an access port on the switch VLAN1

Original Message:
Sent: Mar 26, 2024 09:05 AM
From: chulcher
Subject: Impossible to obtain ip address from windows server dhcp

Is your DHCP server plugged into an access port on the switch that is configured for VLAN 1?  Or the default gateway for VLAN 1 has a DHCP helper configuration pointing at the DHCP server?

------------------------------
Carson Hulcher, ACEX#110

Original Message:
Sent: Mar 26, 2024 04:16 AM
From: VincenP
Subject: Impossible to obtain ip address from windows server dhcp

Hello,

First of all, thank you for your various help which will surely give me ideas. I have a problem getting ip address from a specific vlan that uses a windows DHCP server.

 In fact since last time, when I connect I cannot obtain an IP address on my AP 505 access point.

The explanation seemed clearer to me with a diagram. Do you have an idea ?

Knowing that if I untagged the terminal on vlan 1 the IP assignment works correctly for the ssid... Thanks!

Hello Chulcher,

Its working for all i can get dhcp and obtain ip adress for all SSID.

I missing my configuration between my switch and my router where i have didn't taggued vlan 23 

so now :

And on my switch i got this warming   1/15 -> where my IAP is connected

So you have things working?  If not, you might create a new version of your diagram that actually shows all of what is connected where.  There may be some assumptions being made that aren't true.

I think my configuration was wrong into my router 

but i don't know why... :/

I tried with static ip same result , i can't ping dhcp server.

Set a static IP for the client, when connected to the wireless can the client ping the DHCP server?

Yes i have tried this configuration before but same result my clients can't obtain dhcp ip from windows dhcp server.. :(

https://www.arubanetworks.com/techdocs/CLI-Bank/Content/instant/enet-vlan.htm

or in the UI, the Advanced options of the System menu.

Hello Chulcher,

Thanks for your reply , i think your answer help me so much.

The client retrieves the correct VLAN 1

You're right the pvid for br0 is currently 1 but how can I change? Are there any other changes that need to be made? Below are the commands. Thank you!

Original Message:
Sent: Mar 27, 2024 09:40 AM
From: chulcher
Subject: Impossible to obtain ip address from windows server dhcp

With a client connected, run "show clients status <mac-addr>" and see if the client is really getting assigned to VLAN 1.  If they are, then the problem is likely that you've not changed the IAP's "Switch uplink native VLAN" setting so the IAP doesn't know to tag VLAN 1 ("show datapath bridge", PVID for br0 needs to be 23).

------------------------------
Carson Hulcher, ACEX#110

Original Message:
Sent: Mar 27, 2024 08:57 AM
From: VincenP
Subject: Impossible to obtain ip address from windows server dhcp

Hi Leo,

Thanks for your reply , but i can't change vlan 1 on the ap.  Otherwise I have to change all my switches  config etc .. Unless there is a way to access the 172.16.79.x network from another VLAN from the ap?

Original Message:
Sent: Mar 27, 2024 06:26 AM
From: leo.ma
Subject: Impossible to obtain ip address from windows server dhcp

Hi 

i think vlan 1 should not be labeled on the ap. Your ssid vlan can be replaced with another vlan. The planning of vlan 1 is wrong.

------------------------------
If my post was useful, please Accept Solution and Give Kudos.

leo ma

ACMX

Original Message:
Sent: Mar 27, 2024 04:15 AM
From: VincenP
Subject: Impossible to obtain ip address from windows server dhcp

It's worked if i use vlan 1 on my acces point and update ip to 172.16.79.x

But i wanna used vlan 23 because my network 172.16.79.x are no more ip adresss

Original Message:
Sent: Mar 27, 2024 03:45 AM
From: VincenP
Subject: Impossible to obtain ip address from windows server dhcp

Hello Chulcher,

Thanks for your reply. My DHCP server plugged into an access port on the switch VLAN1

Original Message:
Sent: Mar 26, 2024 09:05 AM
From: chulcher
Subject: Impossible to obtain ip address from windows server dhcp

Is your DHCP server plugged into an access port on the switch that is configured for VLAN 1?  Or the default gateway for VLAN 1 has a DHCP helper configuration pointing at the DHCP server?

------------------------------
Carson Hulcher, ACEX#110

Original Message:
Sent: Mar 26, 2024 04:16 AM
From: VincenP
Subject: Impossible to obtain ip address from windows server dhcp

Hello,

First of all, thank you for your various help which will surely give me ideas. I have a problem getting ip address from a specific vlan that uses a windows DHCP server.

 In fact since last time, when I connect I cannot obtain an IP address on my AP 505 access point.

The explanation seemed clearer to me with a diagram. Do you have an idea ?

Knowing that if I untagged the terminal on vlan 1 the IP assignment works correctly for the ssid... Thanks!

https://www.arubanetworks.com/techdocs/CLI-Bank/Content/instant/enet-vlan.htm

or in the UI, the Advanced options of the System menu.

Hello Chulcher,

Thanks for your reply , i think your answer help me so much.

The client retrieves the correct VLAN 1

You're right the pvid for br0 is currently 1 but how can I change? Are there any other changes that need to be made? Below are the commands. Thank you!

Original Message:
Sent: Mar 27, 2024 09:40 AM
From: chulcher
Subject: Impossible to obtain ip address from windows server dhcp

With a client connected, run "show clients status <mac-addr>" and see if the client is really getting assigned to VLAN 1.  If they are, then the problem is likely that you've not changed the IAP's "Switch uplink native VLAN" setting so the IAP doesn't know to tag VLAN 1 ("show datapath bridge", PVID for br0 needs to be 23).

------------------------------
Carson Hulcher, ACEX#110

Original Message:
Sent: Mar 27, 2024 08:57 AM
From: VincenP
Subject: Impossible to obtain ip address from windows server dhcp

Hi Leo,

Thanks for your reply , but i can't change vlan 1 on the ap.  Otherwise I have to change all my switches  config etc .. Unless there is a way to access the 172.16.79.x network from another VLAN from the ap?

Original Message:
Sent: Mar 27, 2024 06:26 AM
From: leo.ma
Subject: Impossible to obtain ip address from windows server dhcp

Hi 

i think vlan 1 should not be labeled on the ap. Your ssid vlan can be replaced with another vlan. The planning of vlan 1 is wrong.

------------------------------
If my post was useful, please Accept Solution and Give Kudos.

leo ma

ACMX

Original Message:
Sent: Mar 27, 2024 04:15 AM
From: VincenP
Subject: Impossible to obtain ip address from windows server dhcp

It's worked if i use vlan 1 on my acces point and update ip to 172.16.79.x

But i wanna used vlan 23 because my network 172.16.79.x are no more ip adresss

Original Message:
Sent: Mar 27, 2024 03:45 AM
From: VincenP
Subject: Impossible to obtain ip address from windows server dhcp

Hello Chulcher,

Thanks for your reply. My DHCP server plugged into an access port on the switch VLAN1

Original Message:
Sent: Mar 26, 2024 09:05 AM
From: chulcher
Subject: Impossible to obtain ip address from windows server dhcp

Is your DHCP server plugged into an access port on the switch that is configured for VLAN 1?  Or the default gateway for VLAN 1 has a DHCP helper configuration pointing at the DHCP server?

------------------------------
Carson Hulcher, ACEX#110

Original Message:
Sent: Mar 26, 2024 04:16 AM
From: VincenP
Subject: Impossible to obtain ip address from windows server dhcp

Hello,

First of all, thank you for your various help which will surely give me ideas. I have a problem getting ip address from a specific vlan that uses a windows DHCP server.

 In fact since last time, when I connect I cannot obtain an IP address on my AP 505 access point.

The explanation seemed clearer to me with a diagram. Do you have an idea ?

Knowing that if I untagged the terminal on vlan 1 the IP assignment works correctly for the ssid... Thanks!

Chulcher,

TThank you my problem is now solved. But I need a small turnout what is the difference between these 2 parameters, I feel like they are the same?

https://www.arubanetworks.com/techdocs/CLI-Bank/Content/instant/enet-vlan.htm

or in the UI, the Advanced options of the System menu.

Hello Chulcher,

Thanks for your reply , i think your answer help me so much.

The client retrieves the correct VLAN 1

You're right the pvid for br0 is currently 1 but how can I change? Are there any other changes that need to be made? Below are the commands. Thank you!

Original Message:
Sent: Mar 27, 2024 09:40 AM
From: chulcher
Subject: Impossible to obtain ip address from windows server dhcp

With a client connected, run "show clients status <mac-addr>" and see if the client is really getting assigned to VLAN 1.  If they are, then the problem is likely that you've not changed the IAP's "Switch uplink native VLAN" setting so the IAP doesn't know to tag VLAN 1 ("show datapath bridge", PVID for br0 needs to be 23).

------------------------------
Carson Hulcher, ACEX#110

Original Message:
Sent: Mar 27, 2024 08:57 AM
From: VincenP
Subject: Impossible to obtain ip address from windows server dhcp

Hi Leo,

Thanks for your reply , but i can't change vlan 1 on the ap.  Otherwise I have to change all my switches  config etc .. Unless there is a way to access the 172.16.79.x network from another VLAN from the ap?

Original Message:
Sent: Mar 27, 2024 06:26 AM
From: leo.ma
Subject: Impossible to obtain ip address from windows server dhcp

Hi 

i think vlan 1 should not be labeled on the ap. Your ssid vlan can be replaced with another vlan. The planning of vlan 1 is wrong.

------------------------------
If my post was useful, please Accept Solution and Give Kudos.

leo ma

ACMX

Original Message:
Sent: Mar 27, 2024 04:15 AM
From: VincenP
Subject: Impossible to obtain ip address from windows server dhcp

It's worked if i use vlan 1 on my acces point and update ip to 172.16.79.x

But i wanna used vlan 23 because my network 172.16.79.x are no more ip adresss

Original Message:
Sent: Mar 27, 2024 03:45 AM
From: VincenP
Subject: Impossible to obtain ip address from windows server dhcp

Hello Chulcher,

Thanks for your reply. My DHCP server plugged into an access port on the switch VLAN1

Original Message:
Sent: Mar 26, 2024 09:05 AM
From: chulcher
Subject: Impossible to obtain ip address from windows server dhcp

Is your DHCP server plugged into an access port on the switch that is configured for VLAN 1?  Or the default gateway for VLAN 1 has a DHCP helper configuration pointing at the DHCP server?

------------------------------
Carson Hulcher, ACEX#110

Original Message:
Sent: Mar 26, 2024 04:16 AM
From: VincenP
Subject: Impossible to obtain ip address from windows server dhcp

Hello,

First of all, thank you for your various help which will surely give me ideas. I have a problem getting ip address from a specific vlan that uses a windows DHCP server.

 In fact since last time, when I connect I cannot obtain an IP address on my AP 505 access point.

The explanation seemed clearer to me with a diagram. Do you have an idea ?

Knowing that if I untagged the terminal on vlan 1 the IP assignment works correctly for the ssid... Thanks!

System > Uplink switch native VLAN tells the IAP what the native VLAN is on the uplink port.

Uplink management VLAN sets what VLAN the IAP will use for management.

For IAP, the default behavior is that the IAP will be managed on the same VLAN as the uplink switch native VLAN.

Chulcher,

TThank you my problem is now solved. But I need a small turnout what is the difference between these 2 parameters, I feel like they are the same?

https://www.arubanetworks.com/techdocs/CLI-Bank/Content/instant/enet-vlan.htm

or in the UI, the Advanced options of the System menu.

Hello Chulcher,

Thanks for your reply , i think your answer help me so much.

The client retrieves the correct VLAN 1

You're right the pvid for br0 is currently 1 but how can I change? Are there any other changes that need to be made? Below are the commands. Thank you!

Original Message:
Sent: Mar 27, 2024 09:40 AM
From: chulcher
Subject: Impossible to obtain ip address from windows server dhcp

With a client connected, run "show clients status <mac-addr>" and see if the client is really getting assigned to VLAN 1.  If they are, then the problem is likely that you've not changed the IAP's "Switch uplink native VLAN" setting so the IAP doesn't know to tag VLAN 1 ("show datapath bridge", PVID for br0 needs to be 23).

------------------------------
Carson Hulcher, ACEX#110

Original Message:
Sent: Mar 27, 2024 08:57 AM
From: VincenP
Subject: Impossible to obtain ip address from windows server dhcp

Hi Leo,

Thanks for your reply , but i can't change vlan 1 on the ap.  Otherwise I have to change all my switches  config etc .. Unless there is a way to access the 172.16.79.x network from another VLAN from the ap?

Original Message:
Sent: Mar 27, 2024 06:26 AM
From: leo.ma
Subject: Impossible to obtain ip address from windows server dhcp

Hi 

i think vlan 1 should not be labeled on the ap. Your ssid vlan can be replaced with another vlan. The planning of vlan 1 is wrong.

------------------------------
If my post was useful, please Accept Solution and Give Kudos.

leo ma

ACMX

Original Message:
Sent: Mar 27, 2024 04:15 AM
From: VincenP
Subject: Impossible to obtain ip address from windows server dhcp

It's worked if i use vlan 1 on my acces point and update ip to 172.16.79.x

But i wanna used vlan 23 because my network 172.16.79.x are no more ip adresss

Original Message:
Sent: Mar 27, 2024 03:45 AM
From: VincenP
Subject: Impossible to obtain ip address from windows server dhcp

Hello Chulcher,

Thanks for your reply. My DHCP server plugged into an access port on the switch VLAN1

Original Message:
Sent: Mar 26, 2024 09:05 AM
From: chulcher
Subject: Impossible to obtain ip address from windows server dhcp

Is your DHCP server plugged into an access port on the switch that is configured for VLAN 1?  Or the default gateway for VLAN 1 has a DHCP helper configuration pointing at the DHCP server?

------------------------------
Carson Hulcher, ACEX#110

Original Message:
Sent: Mar 26, 2024 04:16 AM
From: VincenP
Subject: Impossible to obtain ip address from windows server dhcp

Hello,

First of all, thank you for your various help which will surely give me ideas. I have a problem getting ip address from a specific vlan that uses a windows DHCP server.

 In fact since last time, when I connect I cannot obtain an IP address on my AP 505 access point.

The explanation seemed clearer to me with a diagram. Do you have an idea ?

Knowing that if I untagged the terminal on vlan 1 the IP assignment works correctly for the ssid... Thanks!

It's worked if i use vlan 1 on my acces point and update ip to 172.16.79.x

But i wanna used vlan 23 because my network 172.16.79.x are no more ip adresss

Original Message:
Sent: Mar 27, 2024 03:45 AM
From: VincenP
Subject: Impossible to obtain ip address from windows server dhcp

Hello Chulcher,

Thanks for your reply. My DHCP server plugged into an access port on the switch VLAN1

Original Message:
Sent: Mar 26, 2024 09:05 AM
From: chulcher
Subject: Impossible to obtain ip address from windows server dhcp

Is your DHCP server plugged into an access port on the switch that is configured for VLAN 1?  Or the default gateway for VLAN 1 has a DHCP helper configuration pointing at the DHCP server?

------------------------------
Carson Hulcher, ACEX#110

Original Message:
Sent: Mar 26, 2024 04:16 AM
From: VincenP
Subject: Impossible to obtain ip address from windows server dhcp

Hello,

First of all, thank you for your various help which will surely give me ideas. I have a problem getting ip address from a specific vlan that uses a windows DHCP server.

 In fact since last time, when I connect I cannot obtain an IP address on my AP 505 access point.

The explanation seemed clearer to me with a diagram. Do you have an idea ?

Knowing that if I untagged the terminal on vlan 1 the IP assignment works correctly for the ssid... Thanks!