Wireless Access

 View Only
last person joined: 8 hours ago 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

Instant-On Guest Portal - Clearpass

This thread has been viewed 9 times

  • 1.  Instant-On Guest Portal - Clearpass

    Posted 11 days ago

    Think my basic questions is....

    Can the Instant-On AP12 or AP32 be configured to use Clearpass as the "controller/authenticator"?

    If it can, any guides?  I just can't get it to work :) .  Got Clearpass 802.1x working fine with Wired using Instant-on switches (1930 & 1960).



  • 2.  RE: Instant-On Guest Portal - Clearpass

    Posted 11 days ago

    Hello,

    First it is not the good place to post for InstantOn, there is a dedicated Web site for those products

    On the other side InstantON APs works OK with Clearpass Guest portal for Web authentication but MAC caching cannot be configured

    1 - Configure the CPPM Guest URL & Radius on "Site Management > Guest Portal" of InstantOn Web site

    2 - On CPPM login page configure the *Address Field (defaut is securelogin.arubanetworks,com) to the factory certificate installed on the InstantOn APs
          it can change after SW upgrade, actual is "captive-2022.aio.cloudauth.net"

    Kind regards

    Christian Chautems


    Original Message


  • 3.  RE: Instant-On Guest Portal - Clearpass

    Posted 11 days ago

    Thanks for the reply.  

    I thought this was for Instant-On so will have a look for that :)

    I'll have a play with the web auth.


    Original Message