That ACL is applied inbound for traffic to your controller/gateway/conductor. If you want to allow only certain ip-ranges for management, filter by source is what you would need for that. Unless I missed your point?
------------------------------
Herman Robers
------------------------
If you have urgent issues, always contact your Aruba partner, distributor, or Aruba TAC Support. Check
https://www.arubanetworks.com/support-services/contact-support/ for how to contact Aruba TAC. Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba Networks.
In case your problem is solved, please invest the time to post a follow-up with the information on how you solved it. Others can benefit from that.
------------------------------
Original Message:
Sent: Jan 02, 2024 05:27 AM
From: Miru
Subject: ip authorized-managers for Webui authentication on a 9004
Hi Herman,
So we can only filter by source? and not on destination via firewall-cp?
I want only allow certain ip-ranges for the management.
We manage the gateway via Central.
Michael
Original Message:
Sent: Dec 22, 2023 10:10 AM
From: Herman Robers
Subject: ip authorized-managers for Webui authentication on a 9004
Check the firewall-cp command for that.
------------------------------
Herman Robers
------------------------
If you have urgent issues, always contact your Aruba partner, distributor, or Aruba TAC Support. Check https://www.arubanetworks.com/support-services/contact-support/ for how to contact Aruba TAC. Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba Networks.
In case your problem is solved, please invest the time to post a follow-up with the information on how you solved it. Others can benefit from that.
Original Message:
Sent: Dec 22, 2023 05:31 AM
From: Miru
Subject: ip authorized-managers for Webui authentication on a 9004
Hi,
Is there a way to set ip authorized-managers for Webui authentication on a 9004?
Best regards,
Michael