Wired Intelligent Edge

 View Only
last person joined: yesterday 

Bring performance and reliability to your network with the HPE Aruba Networking Core, Aggregation, and Access layer switches. Discuss the latest features and functionality of your switching devices, and find ways to improve security across your network to bring together a mobile-first solution
Back to discussions
Expand all | Collapse all

Issues with client device and JL658A 24SFP+ switch

This thread has been viewed 4 times

  • 1.  Issues with client device and JL658A 24SFP+ switch

    MVP EXPERT
    Posted 4 days ago

    Hi,

    Testinig some cert/mac auth on a 6300 sfp+port switch with copper SFP+modules..... problem is,  1st time  (when i was watching ) the technician plugged a windows client it, it doid a machine based auth, downloaded a DUR, was dropped into the statically assigned vlan and obtained an ip address ..... great! seemed to work.

    Now  when you look at the switch interface, thers no link light on the port or the client machine. plug it into another switch ... works, plug it i to this one ... comes up then goes down.

    Is ther something etra i need to do for an SFP+ switch  with  copper GBIC?

    All ive got in  the DUR is

    Class statements allowing  DHCP,DNS,ICMP and an "allow all" ACL

    Policy using above

    Then 

    associate policy staticvlS1h

    reauth-period 3600

    auth-mode client-mode

    client-inactivity timeout none

    Authentication uses statically assigned  swithc port vlan

    A