Wired

 View Only
last person joined: 2 days ago 

Back to discussions
Expand all | Collapse all

Lan ports on 203RP

This thread has been viewed 5 times

  • 1.  Lan ports on 203RP

    Posted Apr 06, 2023 10:04 AM

    Hi all, 

    Might not be the correct forum - if not then i apologize in advance.

    I have a setup where im using a AP315 and 2 203RP's. Its setup as a mesh, where the 315 is the portal and the 2 203rp are points. I want to use the LAN ports 0/1 and 0/2 as regular access ports on my 203's but when ever i plug in a ethernet cable, they reboot and dosn't rejoin the mesh. 

    Any suggestions? Is what i'm trying to do even possible?



  • 2.  RE: Lan ports on 203RP

    EMPLOYEE
    Posted Apr 07, 2023 11:03 AM

    Not sure if you run InstantOS or ArubaOS (with controller). Regardless, have you configured the LAN ports to be downlink ports?



    ------------------------------
    Herman Robers
    ------------------------
    If you have urgent issues, always contact your Aruba partner, distributor, or Aruba TAC Support. Check https://www.arubanetworks.com/support-services/contact-support/ for how to contact Aruba TAC. Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba Networks.

    In case your problem is solved, please invest the time to post a follow-up with the information on how you solved it. Others can benefit from that.
    ------------------------------

    Original Message