Network Management

 View Only
last person joined: an hour ago 

Keep an informative eye on your network with HPE Aruba Networking network management solutions
Back to discussions
Expand all | Collapse all

Login via radius authentication on switch HPE 1920S JL382A

This thread has been viewed 5 times

  • 1.  Login via radius authentication on switch HPE 1920S JL382A

    Posted Sep 07, 2022 11:00 AM

    Hello,

    I'm trying to configure access via radius on a switch 1920S 48p JL382A but it's not working. Is it possible to access the switch on the WEB interface via the radius login or is the radius only used to perform port access control?

    Thanks.

    Felipe



  • 2.  RE: Login via radius authentication on switch HPE 1920S JL382A

    EMPLOYEE
    Posted Sep 07, 2022 01:51 PM
    You may have more success on the InstantON forums.

    ------------------------------
    Herman Robers
    ------------------------
    If you have urgent issues, always contact your Aruba partner, distributor, or Aruba TAC Support. Check https://www.arubanetworks.com/support-services/contact-support/ for how to contact Aruba TAC. Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba Networks.

    In case your problem is solved, please invest the time to post a follow-up with the information on how you solved it. Others can benefit from that.
    ------------------------------

    Original Message