Wired Intelligent Edge

 View Only
last person joined: yesterday 

Bring performance and reliability to your network with the HPE Aruba Networking Core, Aggregation, and Access layer switches. Discuss the latest features and functionality of your switching devices, and find ways to improve security across your network to bring together a mobile-first solution
Back to discussions
Expand all | Collapse all

MAC pinning on AOS-CX?

This thread has been viewed 76 times

  • 1.  MAC pinning on AOS-CX?

    Posted Aug 15, 2020 09:19 PM

    How is MAC Pinning enabled / configured on AOS-CX (specifically on 6300's).  We are on a mix of 10.04 & 10.05...

     

    I would go review the docs on ASP, but it is currently down for maintenance



  • 2.  RE: MAC pinning on AOS-CX?

    EMPLOYEE
    Posted Aug 16, 2020 02:05 PM

    Its under the port access role configuration. Using the keyword "none" provides the pinning as shown below

     

    access(config)# port-access role mytestrole
    access(config-pa-role)# client-inactivity timeout
    <300-4294967295> Set client inactivity timeout value in seconds.
    none Configure to not to remove the client due to inactivity

    access(config-pa-role)# client-inactivity timeout none

     

     



  • 3.  RE: MAC pinning on AOS-CX?

    Posted Aug 16, 2020 05:42 PM

    I had found the proper command earlier.

     

    We are using all Downloadable User-roles from ClearPass, so stuck it in the printer role there and we are good to go.

     

    Thank you!



  • 4.  RE: MAC pinning on AOS-CX?

    Posted Mar 15, 2024 08:28 AM

    Hello ,

    I also use clearpass with User-Roles. Can you tell me how you have done this ? That would be great!

    Thank you


    Original Message


  • 5.  RE: MAC pinning on AOS-CX?

    Posted Oct 20, 2022 07:54 AM
    Hello, how can I active this port-access role mytestrole on a port?

    ------------------------------
    Hartmut
    ------------------------------

    Original Message


  • 6.  RE: MAC pinning on AOS-CX?

    Posted Sep 05, 2023 03:35 PM

    Thanks for this I also added this command to my Printer DUR for ClearPass and am testing it now. 


    Original Message


  • 7.  RE: MAC pinning on AOS-CX?

    EMPLOYEE
    Posted Mar 15, 2024 06:24 PM

    check this new technote about CX switch support for silent clients



    ------------------------------
    If my post was useful accept solution and/or give kudos.
    Any opinions expressed here are solely my own and not necessarily that of HPE or Aruba.
    ------------------------------

    Original Message