You may have gotten a manufacturing sample, in which case you should return it to where you got it to get it replaced by a genuine product.
------------------------------
Herman Robers
------------------------
If you have urgent issues, always contact your Aruba partner, distributor, or Aruba TAC Support. Check
https://www.arubanetworks.com/support-services/contact-support/ for how to contact Aruba TAC. Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba Networks.
In case your problem is solved, please invest the time to post a follow-up with the information on how you solved it. Others can benefit from that.
------------------------------
Original Message:
Sent: May 02, 2024 05:46 AM
From: karl feng
Subject: My aruba 505, It can't boot in aruba system, but I can login broadcom page
No, It's Aurba 505. I am ensure. I think some one modify the ap 505 system. How can I make it back to aruba system.
Original Message:
Sent: May 02, 2024 05:15 AM
From: Herman Robers
Subject: My aruba 505, It can't boot in aruba system, but I can login broadcom page
I've never seen such a login page, so I don't think it is from the Aruba AP. You probably reached another device.
------------------------------
Herman Robers
------------------------
If you have urgent issues, always contact your Aruba partner, distributor, or Aruba TAC Support. Check https://www.arubanetworks.com/support-services/contact-support/ for how to contact Aruba TAC. Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba Networks.
In case your problem is solved, please invest the time to post a follow-up with the information on how you solved it. Others can benefit from that.
Original Message:
Sent: May 02, 2024 04:54 AM
From: karl feng
Subject: My aruba 505, It can't boot in aruba system, but I can login broadcom page
ap 505 can't resotre and read anything in console port. But I found it have the IP 192.168.1.1 /192.168.1.188, so I login.
What's that, How can I return to Aruba system?