it could be a UI thing, before upgrading to the latest version on 8.6.0.x train which is 8.6.0.17 see if you can see it from the CLI
use this command from the VC
"show clients"
------------------------------
Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba.
------------------------------
Original Message:
Sent: Jun 08, 2022 10:56 PM
From: Sarawut Leelatwatanakul
Subject: My Aruba IAP Dashboard shows signal strength zero
Current running version is 8.6.0.11_80920. In addition, AP505s are running together with this cluster.
Original Message:
Sent: Jun 08, 2022 10:51 PM
From: Ariya Parsamanesh
Subject: My Aruba IAP Dashboard shows signal strength zero
what firmware version are you running?
------------------------------
Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba.
Original Message:
Sent: Jun 08, 2022 10:46 PM
From: Sarawut Leelatwatanakul
Subject: My Aruba IAP Dashboard shows signal strength zero
Hi,
In another environment we're using Aruba IAP 207 and 305. We found some APs (AP 207) shown signal strength as zero(see attached file). And clients can connect to that AP. The rest of APs (AP207 , 303, 305) doesn't have this behavior.
Has anyone found this behavior in your environment? or if you have a solution, please share us.
Thanks.
Lee.