Good morning
I am updating a 5310, the last version installed is the one below with a PCB VERSION "A" 127
for higher updates the release notes stipulate PCB VERSION "B" 128 or higher
can I do the upper updates
and can someone tell me if the PCB is a chip whose version cannot be modified or if the program of this chip can be modified
best regards
frederic
HPE Comware Software, Version 7.1.070, Release 3507
Copyright (c) 2010-2021 Hewlett Packard Enterprise Development LP
HPE 5130 48G 4SFP+ 1-slot HI Switch JH324A uptime is 0 weeks, 0 days, 0 hours, 1 minute
Last reboot reason : User reboot
Boot image: flash:/5130hi-cmw710-boot-r3507.bin
Boot image version: 7.1.070, Release 3507
Compiled Jun 08 2021 11:00:00
System image: flash:/5130hi-cmw710-system-r3507.bin
System image version: 7.1.070, Release 3507
Compiled Jun 08 2021 11:00:00
Slot 1:
Uptime is 0 weeks,0 days,0 hours,1 minute
5130 48G 4SFP+ 1-slot HI Switch with 2 Processor
BOARD TYPE: 5130 48G 4SFP+ 1-slot HI Switch
DRAM: 1984M bytes
FLASH: 512M bytes
PCB 1 Version: VER.A
Bootrom Version: 127
CPLD 1 Version: 003
Release Version: HPE 5130 48G 4SFP+ 1-slot HI Switch JH324A-3507
Patch Version : None
Reboot Cause : UserReboot
------------------------------
frederic faure
network and system technician
------------------------------