Wired

 View Only
last person joined: yesterday 

Back to discussions
Expand all | Collapse all

QoS design for voice

This thread has been viewed 13 times

  • 1.  QoS design for voice

    Posted May 17, 2023 01:00 AM

    Hi, i want to deploy QoS for voice on wireless controller. My question is, for the wired side, does the voice configuration needs to be applied on the switch that is connected to the controller/AP only, or does it need to be configured on the entire wired network?

    Other than that, is there any guide on how to configure QoS for voice on switch?

    Thank you.



    ------------------------------
    AA
    ------------------------------


  • 2.  RE: QoS design for voice

    EMPLOYEE
    Posted May 17, 2023 05:28 AM

    This video may be a good start.



    ------------------------------
    Herman Robers
    ------------------------
    If you have urgent issues, always contact your Aruba partner, distributor, or Aruba TAC Support. Check https://www.arubanetworks.com/support-services/contact-support/ for how to contact Aruba TAC. Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba Networks.

    In case your problem is solved, please invest the time to post a follow-up with the information on how you solved it. Others can benefit from that.
    ------------------------------

    Original Message


  • 3.  RE: QoS design for voice

    Posted May 18, 2023 06:55 AM

    You'll need to trust the QoS tags (COS or DSCP) on the path from the endpoint across your wired network otherwise your tags will be removed on egress.


    Original Message