yes thats the best option, just note that Instant OS 8.7.x.x is end of support
------------------------------
If my post was useful accept solution and/or give kudos.
Any opinions expressed here are solely my own and not necessarily that of HPE or Aruba.
------------------------------
Original Message:
Sent: Mar 04, 2024 12:09 PM
From: chulcher
Subject: Regarding virtual controller Dash board -----> Network tab
Upgrading to a currently supported version of AOS (8.10+) is highly recommended.
------------------------------
Carson Hulcher, ACEX#110
Original Message:
Sent: Mar 04, 2024 02:35 AM
From: Samir Srivastava
Subject: Regarding virtual controller Dash board -----> Network tab
Dear Ariyp
Thanks for your reply.
The firmware version is 8.7.1.6_81786 (Digitally Signed - Production Build).
I have configured 9 Networks but only 4 networks are active rest are disabled.
------------------------------
Dr.Samir Srivastava
KNIT Sultanpur (UP)
INDIA
Original Message:
Sent: Mar 03, 2024 04:48 PM
From: ariyap
Subject: Regarding virtual controller Dash board -----> Network tab
what is the exact firmware you have?
Also running 9 WLANs is not recommended as it will reduce the wireless performance due to increase number of beacon frames.
------------------------------
If my post was useful accept solution and/or give kudos.
Any opinions expressed here are solely my own and not necessarily that of HPE or Aruba.
Original Message:
Sent: Mar 03, 2024 10:39 AM
From: Samir Srivastava
Subject: Regarding virtual controller Dash board -----> Network tab
Sir
I am having 61 IAPs 515 in my cluster having nine networks but presently only four are active.. But when I want to look number of clients attached to the MNS-Hostel network it shows 19 but the client count & throughput show 0(Zero). I am not able to understand why it is so. I am using 8.6 firmware in my cluster.
------------------------------
Dr.Samir Srivastava
KNIT Sultanpur (UP)
INDIA
------------------------------