Good afternoon
Based on the RAP documentation do we cluster the controllers the same way clustering mobility controllers but instead of using private addresses I can use public addresses to avoid dealing with one to one NAT at the firewall. So, if I have 2 controllers I will need 4 IP addresses. One for management controller-ip and one for CoA for clearpass in the cluster profile. Also, I need to make sure I create the VLAN pool name at the Master level then configure the ip interface locally at the mobility device level. Am I on the right track?
Thank you for the time,
Nils
------------------------------
Nils Lau
Nova Southeastern University
------------------------------