Wireless Access

 View Only
last person joined: yesterday 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

Role Vlan assignment

This thread has been viewed 12 times

  • 1.  Role Vlan assignment

    Posted Jan 18, 2023 03:18 PM
    Hi, I am running a pair of 7220's on 8.6.0.8, trying to review vlan settings for several roles that are assigned via user rules (mac addresses).  When I look at configuration-Roles & Policies, I select the role and then show advanced view, but when I look at the more tab, under network, some have a vlan assigned, and some do not.  Is there another place in the config where the vlan assignment can be done that I am missing?  A couple of these roles end up in vlan 105 but I cant see where the controller is getting that information?


  • 2.  RE: Role Vlan assignment

    MVP GURU
    Posted Jan 18, 2023 08:51 PM
    It is the place to go to assign a VLAN to the role (see below). If this is set to None, the user role VLAN will be the VLAN of the SSID (see second screenshot)







    ------------------------------
    Dustin Burns

    Lead Mobility Engineer @Worldcom Exchange, Inc.

    ACCX 1271| ACMX 509| ACSP | ACDA | MVP Guru 2022-2023
    If my post was useful accept solution and/or give kudos
    ------------------------------

    Original Message